***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008497.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:02:21' / start Universal time ENDTIME = '03:02:49' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '01:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT big dome turn;had to go back from 2-1 hr angle to do. COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.2 / temperature: deg C, CE200 box TEMP-HRK= 10.2 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008498.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:04:44' / start Universal time ENDTIME = '03:05:13' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '02:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.4 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008499.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:06:56' / start Universal time ENDTIME = '03:07:25' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '03:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.4 / temperature: deg C, CE200 box TEMP-HRK= 9.3 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008500.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:10:58' / start Universal time ENDTIME = '03:11:30' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '04:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT west limit COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.5 / temperature: deg C, CE200 box TEMP-HRK= 9.1 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008501.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:12:15' / start Universal time ENDTIME = '03:12:16' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = '04:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.5 / temperature: deg C, CE200 box TEMP-HRK= 10.1 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008502.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:14:20' / start Universal time ENDTIME = '03:14:21' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = '04:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.4 / temperature: deg C, CE200 box TEMP-HRK= 12.5 / temperature: deg C, heated Rack TEMP-CS1= 1.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008503.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:21:19' / start Universal time ENDTIME = '03:21:48' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '15:00:00' / Declination, +/-dd:mm:ss HA = '00:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT probably no point to do flats COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.6 / temperature: deg C, CE200 box TEMP-HRK= 15.5 / temperature: deg C, heated Rack TEMP-CS1= 1.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008504.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:23:45' / start Universal time ENDTIME = '03:24:13' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '15:00:00' / Declination, +/-dd:mm:ss HA = '00:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT probably no point to do flats COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.6 / temperature: deg C, CE200 box TEMP-HRK= 16.2 / temperature: deg C, heated Rack TEMP-CS1= 1.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008505.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '03:25:48' / start Universal time ENDTIME = '03:26:20' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '15:00:00' / Declination, +/-dd:mm:ss HA = '00:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT probably no point to do flats COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.8 / temperature: deg C, CE200 box TEMP-HRK= 15.3 / temperature: deg C, heated Rack TEMP-CS1= 1.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END