***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008475.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '01:38:54' / start Universal time ENDTIME = '01:39:23' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '-08:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.9 / temperature: deg C, CE200 box TEMP-HRK= 11.3 / temperature: deg C, heated Rack TEMP-CS1= 2.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008476.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '01:45:31' / start Universal time ENDTIME = '01:46:00' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '+45:00:00' / Declination, +/-dd:mm:ss HA = '-07:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.7 / temperature: deg C, CE200 box TEMP-HRK= 15.8 / temperature: deg C, heated Rack TEMP-CS1= 2.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008477.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '01:48:02' / start Universal time ENDTIME = '01:48:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '+45:00:00' / Declination, +/-dd:mm:ss HA = '-06:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT all ha movements gradual to avoid jerks. COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.7 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 2.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008478.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '01:54:14' / start Universal time ENDTIME = '01:54:43' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '+45:00:00' / Declination, +/-dd:mm:ss HA = '-05:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.6 / temperature: deg C, CE200 box TEMP-HRK= 12.9 / temperature: deg C, heated Rack TEMP-CS1= 1.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008479.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '01:56:00' / start Universal time ENDTIME = '01:56:01' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = '-05:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.7 / temperature: deg C, CE200 box TEMP-HRK= 12.3 / temperature: deg C, heated Rack TEMP-CS1= 1.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008480.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '01:58:55' / start Universal time ENDTIME = '01:59:23' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '+45:00:00' / Declination, +/-dd:mm:ss HA = '-04:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.6 / temperature: deg C, CE200 box TEMP-HRK= 12.2 / temperature: deg C, heated Rack TEMP-CS1= 1.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END