***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000060.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-19' / Date of start of observation in UTC TIME-OBS= '00:04:42' / start Universal time ENDTIME = '00:05:02' / End time of exposure RA = '4:58:51 ' / Right Ascension, hh:mm:ss DEC = '15:15:54' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4610 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = / slit length in microns COMMENT inboard hartmann COMMENT Set up 22:20UT; CCD T= -100.4C COMMENT slitlen 400=.225 stellar,500u=.215 for flats; INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= -2.2 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 22.2 / temperature: deg C, CE200 box TEMP-HRK= 10.6 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -2.0 / temperature: deg C, Eche, position1 TEMP-EC2= -2.0 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000061.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-19' / Date of start of observation in UTC TIME-OBS= '00:06:13' / start Universal time ENDTIME = '00:06:32' / End time of exposure RA = '4:58:51 ' / Right Ascension, hh:mm:ss DEC = '15:15:54' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4610 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = / slit length in microns COMMENT outboard hartmann COMMENT Set up 22:20UT; CCD T= -100.4C COMMENT slitlen 400=.225 stellar,500u=.215 for flats; INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= -2.2 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 22.2 / temperature: deg C, CE200 box TEMP-HRK= 10.6 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -2.0 / temperature: deg C, Eche, position1 TEMP-EC2= -2.0 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000062.FTS' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-19' / Date of start of observation in UTC TIME-OBS= '00:08:44' / start Universal time ENDTIME = '00:08:44' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4610 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT average of 4 biases COMMENT Set up 22:20UT; CCD T= -100.4C COMMENT slitlen 400=.225 stellar,500u=.215 for flats; INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= -2.2 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 22.1 / temperature: deg C, CE200 box TEMP-HRK= 8.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -2.0 / temperature: deg C, Eche, position1 TEMP-EC2= -2.0 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000063.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-19' / Date of start of observation in UTC TIME-OBS= '00:35:28' / start Universal time ENDTIME = '00:35:47' / End time of exposure RA = '4:58:51 ' / Right Ascension, hh:mm:ss DEC = '15:15:54' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4610 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT inboard hartmann COMMENT Set up 22:20UT; CCD T= -100.4C COMMENT slitlen 400=.225 stellar,500u=.215 for flats; INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= -2.2 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 21.5 / temperature: deg C, CE200 box TEMP-HRK= 11.6 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -2.0 / temperature: deg C, Eche, position1 TEMP-EC2= -2.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000063.fts' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-19' / Date of start of observation in UTC TIME-OBS= '00:35:28' / start Universal time ENDTIME = '00:35:47' / End time of exposure RA = '4:58:51 ' / Right Ascension, hh:mm:ss DEC = '15:15:54' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4610 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT COMMENT Set up 22:20UT; CCD T= -100.4C COMMENT slitlen 400=.225 stellar,500u=.215 for flats; INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= -2.2 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 21.5 / temperature: deg C, CE200 box TEMP-HRK= 11.6 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -2.0 / temperature: deg C, Eche, position1 TEMP-EC2= -2.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000064.FTS' / File name OBJECT = 'HD15089 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-19' / Date of start of observation in UTC TIME-OBS= '00:37:22' / start Universal time ENDTIME = '01:39:02' / End time of exposure RA = '2:20:49 ' / Right Ascension, hh:mm:ss DEC = '66:57:11' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 3700 / Exposure time in seconds EXPCOUNT= 1315 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4610 / Cross Grating Tilt, degrees FOCUSTEL= 2269 / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT 1-2 sec seeing;part cloudy COMMENT Set up 22:20UT; CCD T= -100.4C COMMENT slitlen 400=.225 stellar,500u=.215 for flats; INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= -2.2 / temperature: deg C, Dome floor air TEMP-CSE= -5.8 / temperature: deg C, pri cast TEMP-SEC= -6.4 / temperature: deg C, sec air TEMP-PRI= -5.3 / temperature: deg C, pri air TEMP-CON= 21.4 / temperature: deg C, CE200 box TEMP-HRK= 10.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -2.0 / temperature: deg C, Eche, position1 TEMP-EC2= -2.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END