***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17325.fts' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:06:10' / start Universal time ENDTIME = '08:06:32' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 3.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .255 / slit length in microns COMMENT COMMENT Set up 05:40UT; CCD T= -100.0 C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.7 / temperature: deg C, CE200 box TEMP-HRK= 7.7 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 6.4 / temperature: deg C, Eche, position1 TEMP-EC2= 6.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17326.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:07:32' / start Universal time ENDTIME = '08:07:32' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .255 / slit length in microns COMMENT average of 4 biases COMMENT Set up 05:40UT; CCD T= -100.0 C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.6 / temperature: deg C, CE200 box TEMP-HRK= 7.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 6.0 / temperature: deg C, Eche, position1 TEMP-EC2= 5.7 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17327.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:33:51' / start Universal time ENDTIME = '08:34:49' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.8 / temperature: deg C, Eche, position1 TEMP-EC2= 5.5 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17328.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:35:05' / start Universal time ENDTIME = '08:36:04' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 12.0 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.7 / temperature: deg C, Eche, position1 TEMP-EC2= 5.4 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17329.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:36:20' / start Universal time ENDTIME = '08:37:19' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.7 / temperature: deg C, Eche, position1 TEMP-EC2= 5.4 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17330.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:37:35' / start Universal time ENDTIME = '08:38:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 11.5 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.7 / temperature: deg C, Eche, position1 TEMP-EC2= 5.4 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17331.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:38:49' / start Universal time ENDTIME = '08:39:48' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.4 / temperature: deg C, CE200 box TEMP-HRK= 11.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.6 / temperature: deg C, Eche, position1 TEMP-EC2= 5.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17332.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:40:04' / start Universal time ENDTIME = '08:41:03' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 11.2 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.6 / temperature: deg C, Eche, position1 TEMP-EC2= 5.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17333.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:41:19' / start Universal time ENDTIME = '08:42:17' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 10.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.6 / temperature: deg C, Eche, position1 TEMP-EC2= 5.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17334.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:42:33' / start Universal time ENDTIME = '08:43:32' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.4 / temperature: deg C, CE200 box TEMP-HRK= 10.7 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.6 / temperature: deg C, Eche, position1 TEMP-EC2= 5.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17335.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:43:48' / start Universal time ENDTIME = '08:44:47' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.5 / temperature: deg C, CE200 box TEMP-HRK= 10.5 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.6 / temperature: deg C, Eche, position1 TEMP-EC2= 5.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17336.fts' / File name OBJECT = 'tUngsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:45:03' / start Universal time ENDTIME = '08:46:01' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 40.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT slitlen .215 flat,stellar was .225 COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.5 / temperature: deg C, CE200 box TEMP-HRK= 10.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.6 / temperature: deg C, Eche, position1 TEMP-EC2= 5.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17337.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '08:52:37' / start Universal time ENDTIME = '08:52:37' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2218 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .205 / slit length in microns COMMENT average of 4 biases COMMENT Set up 08:20UT; CCD T= -100.2C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 4.1 / temperature: deg C, pri cast TEMP-SEC= 1.1 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 25.5 / temperature: deg C, CE200 box TEMP-HRK= 9.2 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 5.6 / temperature: deg C, Eche, position1 TEMP-EC2= 5.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï