***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17313.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '05:38:56' / start Universal time ENDTIME = '05:38:56' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2747 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .255 / slit length in microns COMMENT average of 4 biases COMMENT Set up 05:40UT; CCD T= -100.0 C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 9.9 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 25.7 / temperature: deg C, CE200 box TEMP-HRK= 12.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 7.9 / temperature: deg C, Eche, position1 TEMP-EC2= 7.8 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17314.fts' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '05:12:19' / start Universal time ENDTIME = '05:12:38' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2747 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .255 / slit length in microns COMMENT inboard focus test COMMENT Set up 05:40UT; CCD T= -100.0 C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 9.9 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 25.7 / temperature: deg C, CE200 box TEMP-HRK= 12.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 7.9 / temperature: deg C, Eche, position1 TEMP-EC2= 7.8 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17315.fts' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '05:41:36' / start Universal time ENDTIME = '05:41:58' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 3.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2747 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .255 / slit length in microns COMMENT COMMENT Set up 05:40UT; CCD T= -100.0 C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 9.9 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 25.7 / temperature: deg C, CE200 box TEMP-HRK= 12.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 7.9 / temperature: deg C, Eche, position1 TEMP-EC2= 7.8 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'CE17316.fts' / File name OBJECT = 'HD40312 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Wde]/Tn/Bla' / Name(s) or ID(s) DATE-OBS= '25/11/99' / Universal Date: DD/MM/YY TIME-OBS= '05:43:24' / start Universal time ENDTIME = '06:13:25' / End time of exposure RA = '5:52:54 ' / Right Ascension, hh:mm:ss DEC = '37:12:21' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1801 / Exposure time in seconds EXPCOUNT= 535 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4530 / Central wavelength for observation GRATING = 52.6 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .460 / Cross Grating Tilt, degrees FOCUSTEL= 2747 / telescope focus FOCUSSP = .236 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .255 / slit length in microns COMMENT about 15degs from full moon in bright ice crystal cloud COMMENT Set up 05:40UT; CCD T= -100.0 C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= 4.9 / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 9.9 / temperature: deg C, sec air TEMP-PRI= 9.2 / temperature: deg C, pri air TEMP-CON= 25.7 / temperature: deg C, CE200 box TEMP-HRK= 12.0 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 7.9 / temperature: deg C, Eche, position1 TEMP-EC2= 7.7 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï