***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[451:650,1:1024]' / Frame format FILE = 'CC69394.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/CC/WxL' / Name(s) or ID(s) DATE-OBS= '01/11/99' / Universal Date: DD/MM/YY TIME-OBS= '07:10:33' / start Universal time ENDTIME = '07:10:44' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1950 / Equinox EXPTIME = 3.30 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5700 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2706 / telescope focus FOCUSSP = 5.35 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:55 UT -100.6 C COMMENT Exp meter HV=1320V; ND5+ND1.2 for FeAr source INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54.8 / % relative humidity TEMP-DOM= 9.3 / temperature: deg C, Dome floor air TEMP-CSE= 6.7 / temperature: deg C, pri cast TEMP-SEC= 5.2 / temperature: deg C, sec air TEMP-PRI= 6.5 / temperature: deg C, pri air TEMP-CON= 29.2 / temperature: deg C, CE200 box TEMP-HRK= 10.7 / temperature: deg C, heated Rack TEMP-CS1= 9.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 11.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[451:650,1:1024]' / Frame format FILE = 'CC69395.fts' / File name OBJECT = 'NVSS0207+393' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/CC/WxL' / Name(s) or ID(s) DATE-OBS= '01/11/99' / Universal Date: DD/MM/YY TIME-OBS= '07:13:30' / start Universal time ENDTIME = '07:33:31' / End time of exposure RA = '02:07:07' / Right Ascension, hh:mm:ss DEC = '39:35:48' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1950 / Equinox EXPTIME = 1201 / Exposure time in seconds EXPCOUNT= 603 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5700 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2706 / telescope focus FOCUSSP = 5.35 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:55 UT -100.6 C COMMENT Exp meter HV=1320V; ND5+ND1.2 for FeAr source INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54.8 / % relative humidity TEMP-DOM= 9.3 / temperature: deg C, Dome floor air TEMP-CSE= 6.7 / temperature: deg C, pri cast TEMP-SEC= 5.2 / temperature: deg C, sec air TEMP-PRI= 6.5 / temperature: deg C, pri air TEMP-CON= 29.2 / temperature: deg C, CE200 box TEMP-HRK= 10.7 / temperature: deg C, heated Rack TEMP-CS1= 9.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[451:650,1:1024]' / Frame format FILE = 'CC69396.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/CC/WxL' / Name(s) or ID(s) DATE-OBS= '01/11/99' / Universal Date: DD/MM/YY TIME-OBS= '07:34:52' / start Universal time ENDTIME = '07:35:02' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1950 / Equinox EXPTIME = 3.30 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5700 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2706 / telescope focus FOCUSSP = 5.35 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:55 UT -100.6 C COMMENT Exp meter HV=1320V; ND5+ND1.2 for FeAr source INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54.8 / % relative humidity TEMP-DOM= 9.3 / temperature: deg C, Dome floor air TEMP-CSE= 6.7 / temperature: deg C, pri cast TEMP-SEC= 5.2 / temperature: deg C, sec air TEMP-PRI= 6.5 / temperature: deg C, pri air TEMP-CON= 30.3 / temperature: deg C, CE200 box TEMP-HRK= 10.8 / temperature: deg C, heated Rack TEMP-CS1= 9.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[451:650,1:1024]' / Frame format FILE = 'CC69397.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/CC/WxL' / Name(s) or ID(s) DATE-OBS= '01/11/99' / Universal Date: DD/MM/YY TIME-OBS= '07:46:25' / start Universal time ENDTIME = '07:46:35' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1950 / Equinox EXPTIME = 3.30 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5700 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2706 / telescope focus FOCUSSP = 5.35 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:55 UT -100.6 C COMMENT Exp meter HV=1320V; ND5+ND1.2 for FeAr source INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54.8 / % relative humidity TEMP-DOM= 9.3 / temperature: deg C, Dome floor air TEMP-CSE= 6.7 / temperature: deg C, pri cast TEMP-SEC= 5.2 / temperature: deg C, sec air TEMP-PRI= 6.5 / temperature: deg C, pri air TEMP-CON= 30.1 / temperature: deg C, CE200 box TEMP-HRK= 10.6 / temperature: deg C, heated Rack TEMP-CS1= 9.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[451:650,1:1024]' / Frame format FILE = 'CC69398.fts' / File name OBJECT = 'NVSS0507+031' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/CC/WxL' / Name(s) or ID(s) DATE-OBS= '01/11/99' / Universal Date: DD/MM/YY TIME-OBS= '07:47:56' / start Universal time ENDTIME = '07:54:33' / End time of exposure RA = '05:06:32' / Right Ascension, hh:mm:ss DEC = '03:13:26' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1950 / Equinox EXPTIME = 397 / Exposure time in seconds EXPCOUNT= 504 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5700 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2706 / telescope focus FOCUSSP = 5.35 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:55 UT -100.6 C COMMENT Exp meter HV=1320V; ND5+ND1.2 for FeAr source INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54.8 / % relative humidity TEMP-DOM= 9.3 / temperature: deg C, Dome floor air TEMP-CSE= 6.7 / temperature: deg C, pri cast TEMP-SEC= 5.2 / temperature: deg C, sec air TEMP-PRI= 6.5 / temperature: deg C, pri air TEMP-CON= 30.2 / temperature: deg C, CE200 box TEMP-HRK= 10.6 / temperature: deg C, heated Rack TEMP-CS1= 9.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[451:650,1:1024]' / Frame format FILE = 'CC69399.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/CC/WxL' / Name(s) or ID(s) DATE-OBS= '01/11/99' / Universal Date: DD/MM/YY TIME-OBS= '07:56:52' / start Universal time ENDTIME = '07:57:02' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1950 / Equinox EXPTIME = 3.30 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5700 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2706 / telescope focus FOCUSSP = 5.35 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:55 UT -100.6 C COMMENT Exp meter HV=1320V; ND5+ND1.2 for FeAr source INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54.8 / % relative humidity TEMP-DOM= 9.3 / temperature: deg C, Dome floor air TEMP-CSE= 6.7 / temperature: deg C, pri cast TEMP-SEC= 5.2 / temperature: deg C, sec air TEMP-PRI= 6.5 / temperature: deg C, pri air TEMP-CON= 30.5 / temperature: deg C, CE200 box TEMP-HRK= 10.8 / temperature: deg C, heated Rack TEMP-CS1= 9.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[451:650,1:1024]' / Frame format FILE = 'CC69400.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Mki/CC/WxL' / Name(s) or ID(s) DATE-OBS= '01/11/99' / Universal Date: DD/MM/YY TIME-OBS= '07:57:27' / start Universal time ENDTIME = '07:57:28' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1950 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5700 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2706 / telescope focus FOCUSSP = 5.35 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @04:55 UT -100.6 C COMMENT Exp meter HV=1320V; ND5+ND1.2 for FeAr source INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54.8 / % relative humidity TEMP-DOM= 9.3 / temperature: deg C, Dome floor air TEMP-CSE= 6.7 / temperature: deg C, pri cast TEMP-SEC= 5.2 / temperature: deg C, sec air TEMP-PRI= 6.5 / temperature: deg C, pri air TEMP-CON= 30.4 / temperature: deg C, CE200 box TEMP-HRK= 10.7 / temperature: deg C, heated Rack TEMP-CS1= 9.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï