***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC69119.fts' / File name OBJECT = 'V401 Cyg' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Rci]/WxL/Tn' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '03:05:35' / start Universal time ENDTIME = '03:25:36' / End time of exposure RA = '19:29:20' / Right Ascension, hh:mm:ss DEC = '30:24:28' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1201 / Exposure time in seconds EXPCOUNT= 336 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.00 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @03:00 UT -100.4 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 3.6 / temperature: deg C, pri cast TEMP-SEC= 1.5 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 30.1 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 4.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC69120.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rci]/WxL/Tn' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '03:26:27' / start Universal time ENDTIME = '03:26:38' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.00 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @03:00 UT -100.4 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 3.6 / temperature: deg C, pri cast TEMP-SEC= 1.5 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 29.8 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= 4.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC69121.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Rci]/WxL/Tn' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '03:27:13' / start Universal time ENDTIME = '03:27:13' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.00 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @03:00 UT -100.4 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 3.6 / temperature: deg C, pri cast TEMP-SEC= 1.5 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 29.9 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= 4.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC69122.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rci]/WxL/Tn' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '03:36:48' / start Universal time ENDTIME = '03:36:59' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.00 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @03:00 UT -100.4 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 3.6 / temperature: deg C, pri cast TEMP-SEC= 1.5 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 29.0 / temperature: deg C, CE200 box TEMP-HRK= 14.8 / temperature: deg C, heated Rack TEMP-CS1= 3.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC69123.fts' / File name OBJECT = 'm31xray ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Rci]/WxL/Tn' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '03:38:22' / start Universal time ENDTIME = '03:55:03' / End time of exposure RA = '00:42:42' / Right Ascension, hh:mm:ss DEC = '41:16:08' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1001 / Exposure time in seconds EXPCOUNT= 333 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.00 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT central stellar like cluster at M31 center COMMENT ccd temp @03:00 UT -100.4 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 3.6 / temperature: deg C, pri cast TEMP-SEC= 1.5 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 29.0 / temperature: deg C, CE200 box TEMP-HRK= 15.7 / temperature: deg C, heated Rack TEMP-CS1= 3.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC69124.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rci]/WxL/Tn' / Name(s) or ID(s) DATE-OBS= '28/10/99' / Universal Date: DD/MM/YY TIME-OBS= '03:57:15' / start Universal time ENDTIME = '03:57:26' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.00 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @03:00 UT -100.4 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 3.6 / temperature: deg C, pri cast TEMP-SEC= 1.5 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 29.4 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= 3.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï