***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010932.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:01:32' / start Universal time ENDTIME = '01:01:47' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4465 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 42.56 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 25.6 / temperature: deg C, CE200 box TEMP-HRK= 11.0 / temperature: deg C, heated Rack TEMP-CS1= 0.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010933.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:04:52' / start Universal time ENDTIME = '01:05:07' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 25.4 / temperature: deg C, CE200 box TEMP-HRK= 10.5 / temperature: deg C, heated Rack TEMP-CS1= 0.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010934.FTS' / File name OBJECT = 'HD37468 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:06:02' / start Universal time ENDTIME = '01:07:20' / End time of exposure RA = '5:33:44 ' / Right Ascension, hh:mm:ss DEC = '-02:39:28' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 78 / Exposure time in seconds EXPCOUNT= 4809 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 10.4 / temperature: deg C, heated Rack TEMP-CS1= 0.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010935.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:08:45' / start Universal time ENDTIME = '01:09:00' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 25.1 / temperature: deg C, CE200 box TEMP-HRK= 10.2 / temperature: deg C, heated Rack TEMP-CS1= 0.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010936.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:12:21' / start Universal time ENDTIME = '01:12:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 25.0 / temperature: deg C, CE200 box TEMP-HRK= 10.0 / temperature: deg C, heated Rack TEMP-CS1= 0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010937.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:13:11' / start Universal time ENDTIME = '01:13:23' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.8 / temperature: deg C, CE200 box TEMP-HRK= 9.9 / temperature: deg C, heated Rack TEMP-CS1= 0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010938.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:13:32' / start Universal time ENDTIME = '01:13:44' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.8 / temperature: deg C, CE200 box TEMP-HRK= 9.9 / temperature: deg C, heated Rack TEMP-CS1= 0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010939.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:13:53' / start Universal time ENDTIME = '01:14:05' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.9 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= 0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010940.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:14:14' / start Universal time ENDTIME = '01:14:26' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.8 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010941.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:14:34' / start Universal time ENDTIME = '01:14:46' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.8 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010942.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:14:55' / start Universal time ENDTIME = '01:15:07' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.7 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010943.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:15:16' / start Universal time ENDTIME = '01:15:28' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.7 / temperature: deg C, CE200 box TEMP-HRK= 9.7 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010944.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:15:37' / start Universal time ENDTIME = '01:15:49' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.7 / temperature: deg C, CE200 box TEMP-HRK= 9.7 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010945.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:15:58' / start Universal time ENDTIME = '01:16:10' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT nd 4 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.7 / temperature: deg C, CE200 box TEMP-HRK= 9.7 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010946.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:20:03' / start Universal time ENDTIME = '01:20:18' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.4 / temperature: deg C, CE200 box TEMP-HRK= 9.6 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010947.FTS' / File name OBJECT = 'HD36395 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:22:08' / start Universal time ENDTIME = '01:26:29' / End time of exposure RA = '05:31:27' / Right Ascension, hh:mm:ss DEC = '-03:40:42' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 261 / Exposure time in seconds EXPCOUNT= 621 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT centlam really about 6640A for tgrating 56.50 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.3 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010948.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:27:35' / start Universal time ENDTIME = '01:27:50' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.2 / temperature: deg C, CE200 box TEMP-HRK= 8.9 / temperature: deg C, heated Rack TEMP-CS1= 0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010949.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:32:09' / start Universal time ENDTIME = '01:32:21' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6601 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.32 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2774 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -3.2 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.2 / temperature: deg C, pri air TEMP-CON= 24.0 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 0.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010950.FTS' / File name OBJECT = 'HD36395 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:33:31' / start Universal time ENDTIME = '01:40:48' / End time of exposure RA = '05:31:27' / Right Ascension, hh:mm:ss DEC = '-03:40:42' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 437 / Exposure time in seconds EXPCOUNT= 925 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6601 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.32 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2760 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std vel rv=+08.52 COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -1.4 / temperature: deg C, pri cast TEMP-SEC= -1.1 / temperature: deg C, sec air TEMP-PRI= -.9 / temperature: deg C, pri air TEMP-CON= 23.9 / temperature: deg C, CE200 box TEMP-HRK= 12.9 / temperature: deg C, heated Rack TEMP-CS1= 0.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010951.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Bln]/Tn/Mki' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:41:31' / start Universal time ENDTIME = '01:41:43' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6601 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.32 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2760 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 250 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -1.4 / temperature: deg C, pri cast TEMP-SEC= -1.1 / temperature: deg C, sec air TEMP-PRI= -.9 / temperature: deg C, pri air TEMP-CON= 24.6 / temperature: deg C, CE200 box TEMP-HRK= 15.5 / temperature: deg C, heated Rack TEMP-CS1= 0.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010952.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:53:23' / start Universal time ENDTIME = '01:53:23' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6625 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.38 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2760 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -1.4 / temperature: deg C, pri cast TEMP-SEC= -1.1 / temperature: deg C, sec air TEMP-PRI= -.9 / temperature: deg C, pri air TEMP-CON= 24.2 / temperature: deg C, CE200 box TEMP-HRK= 13.1 / temperature: deg C, heated Rack TEMP-CS1= 0.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0010953.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2001-03-19' / Date of start of observation in UTC TIME-OBS= '01:59:51' / start Universal time ENDTIME = '02:00:03' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6625 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.38 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2760 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:00UT -100.0C ;Tel east side for Bln pgm COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 45 / % relative humidity TEMP-DOM= +00.9 / temperature: deg C, Dome floor air TEMP-CSE= -1.4 / temperature: deg C, pri cast TEMP-SEC= -1.1 / temperature: deg C, sec air TEMP-PRI= -.9 / temperature: deg C, pri air TEMP-CON= 23.9 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 0.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END