***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009201.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:20:53' / start Universal time ENDTIME = '01:21:05' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.5 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= -12.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009202.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:24:00' / start Universal time ENDTIME = '01:24:37' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.4 / temperature: deg C, CE200 box TEMP-HRK= 9.6 / temperature: deg C, heated Rack TEMP-CS1= -12.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009203.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:25:50' / start Universal time ENDTIME = '01:26:27' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.3 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= -12.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009204.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:26:37' / start Universal time ENDTIME = '01:27:17' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.4 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= -12.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009205.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:27:27' / start Universal time ENDTIME = '01:28:06' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.4 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= -13.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009206.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:28:15' / start Universal time ENDTIME = '01:28:54' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.4 / temperature: deg C, CE200 box TEMP-HRK= 9.6 / temperature: deg C, heated Rack TEMP-CS1= -13.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009207.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:29:03' / start Universal time ENDTIME = '01:29:42' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.4 / temperature: deg C, CE200 box TEMP-HRK= 9.7 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009208.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:29:51' / start Universal time ENDTIME = '01:30:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.4 / temperature: deg C, CE200 box TEMP-HRK= 9.7 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009209.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:30:40' / start Universal time ENDTIME = '01:31:19' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.4 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009210.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:31:28' / start Universal time ENDTIME = '01:32:07' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.5 / temperature: deg C, CE200 box TEMP-HRK= 9.9 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009211.FTS' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:32:16' / start Universal time ENDTIME = '01:32:55' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 30.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std after reboot;rv =-27.34 COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.5 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009212.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:33:50' / start Universal time ENDTIME = '01:33:51' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.5 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009213.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:35:14' / start Universal time ENDTIME = '01:35:15' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.6 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009214.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:36:40' / start Universal time ENDTIME = '01:36:41' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.5 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009215.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:38:05' / start Universal time ENDTIME = '01:38:06' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.6 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009216.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:39:32' / start Universal time ENDTIME = '01:39:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.6 / temperature: deg C, CE200 box TEMP-HRK= 9.8 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009217.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:45:19' / start Universal time ENDTIME = '01:45:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2811 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.5 / temperature: deg C, pri cast TEMP-SEC= -14.3 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.6 / temperature: deg C, CE200 box TEMP-HRK= 9.9 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0009218.FTS' / File name OBJECT = 'HD44990 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Rm]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-12-29' / Date of start of observation in UTC TIME-OBS= '01:48:47' / start Universal time ENDTIME = '02:23:50' / End time of exposure RA = '6:19:49 ' / Right Ascension, hh:mm:ss DEC = '07:08:25' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 2103 / Exposure time in seconds EXPCOUNT= 4887 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 3950 / Central wavelength for observation GRATING = 600J / Grating description, lines/mm GTILT = 32.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2809 / telescope focus FOCUSSP = 5.25 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT seeing better then last exp;4 sec now COMMENT ccdtemp @23:00UT -100.7C COMMENT BG39 order separation for stellar ,flats and FeAr comparison/2nd orde INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= -11 / temperature: deg C, Dome floor air TEMP-CSE= -13.6 / temperature: deg C, pri cast TEMP-SEC= -15.2 / temperature: deg C, sec air TEMP-PRI= -13.4 / temperature: deg C, pri air TEMP-CON= 20.7 / temperature: deg C, CE200 box TEMP-HRK= 10.0 / temperature: deg C, heated Rack TEMP-CS1= -13.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= -11.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END