***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0006040.FTS' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Rci/Tn/Du' / Name(s) or ID(s) DATE-OBS= '2000-09-06' / Date of start of observation in UTC TIME-OBS= '00:27:33' / start Universal time ENDTIME = '00:27:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.01 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = 4.83 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @00:30UT -100.8C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 18.2 / temperature: deg C, CE200 box TEMP-HRK= 14.0 / temperature: deg C, heated Rack TEMP-CS1= 14.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 14.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0006041.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Rci/Tn/Du' / Name(s) or ID(s) DATE-OBS= '2000-09-06' / Date of start of observation in UTC TIME-OBS= '00:35:53' / start Universal time ENDTIME = '00:36:08' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.01 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = 4.83 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.8C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 18.3 / temperature: deg C, CE200 box TEMP-HRK= 13.9 / temperature: deg C, heated Rack TEMP-CS1= 14.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 15.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0006042.FTS' / File name OBJECT = 'Ksi Boo ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Rci/Tn/Du' / Name(s) or ID(s) DATE-OBS= '2000-09-06' / Date of start of observation in UTC TIME-OBS= '00:38:07' / start Universal time ENDTIME = '00:40:20' / End time of exposure RA = '14:51:23' / Right Ascension, hh:mm:ss DEC = '19:06:02' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 133 / Exposure time in seconds EXPCOUNT= 6880 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.01 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2744 / telescope focus FOCUSSP = 4.83 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT brighter SE of pair COMMENT ccd temp @00:30UT -100.8C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 10.8 / temperature: deg C, pri cast TEMP-SEC= 10.1 / temperature: deg C, sec air TEMP-PRI= 11.2 / temperature: deg C, pri air TEMP-CON= 18.2 / temperature: deg C, CE200 box TEMP-HRK= 13.9 / temperature: deg C, heated Rack TEMP-CS1= 14.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 15.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0006043.FTS' / File name OBJECT = 'Ksi Boo ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Rci/Tn/Du' / Name(s) or ID(s) DATE-OBS= '2000-09-06' / Date of start of observation in UTC TIME-OBS= '00:41:37' / start Universal time ENDTIME = '00:50:11' / End time of exposure RA = '14:51:23' / Right Ascension, hh:mm:ss DEC = '19:06:02' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 514 / Exposure time in seconds EXPCOUNT= 4101 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.01 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2730 / telescope focus FOCUSSP = 4.83 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT fainter NW of pair COMMENT ccd temp @00:30UT -100.8C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 11 / temperature: deg C, pri cast TEMP-SEC= 9.9 / temperature: deg C, sec air TEMP-PRI= 11.1 / temperature: deg C, pri air TEMP-CON= 18.3 / temperature: deg C, CE200 box TEMP-HRK= 13.9 / temperature: deg C, heated Rack TEMP-CS1= 14.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 15.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0006044.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Rci/Tn/Du' / Name(s) or ID(s) DATE-OBS= '2000-09-06' / Date of start of observation in UTC TIME-OBS= '00:51:57' / start Universal time ENDTIME = '00:52:11' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.01 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2730 / telescope focus FOCUSSP = 4.83 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.8C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 11 / temperature: deg C, pri cast TEMP-SEC= 9.9 / temperature: deg C, sec air TEMP-PRI= 11.1 / temperature: deg C, pri air TEMP-CON= 18.2 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 15.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[361:560,1:1024]' / Frame format FILE = 'C0006045.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Rci/Tn/Du' / Name(s) or ID(s) DATE-OBS= '2000-09-06' / Date of start of observation in UTC TIME-OBS= '00:56:21' / start Universal time ENDTIME = '00:56:35' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.01 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2730 / telescope focus FOCUSSP = 4.83 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.8C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 11 / temperature: deg C, pri cast TEMP-SEC= 9.9 / temperature: deg C, sec air TEMP-PRI= 11.1 / temperature: deg C, pri air TEMP-CON= 18.2 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 15.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END