***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008481.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:01:34' / start Universal time ENDTIME = '02:02:03' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '-03:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.5 / temperature: deg C, CE200 box TEMP-HRK= 12.0 / temperature: deg C, heated Rack TEMP-CS1= 1.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008482.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:10:25' / start Universal time ENDTIME = '02:10:53' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '-02:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT big dome turn to west before exp. COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.6 / temperature: deg C, CE200 box TEMP-HRK= 10.0 / temperature: deg C, heated Rack TEMP-CS1= 1.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008483.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:12:29' / start Universal time ENDTIME = '02:12:58' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '-01:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.5 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= 1.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008484.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:17:55' / start Universal time ENDTIME = '02:18:23' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '00:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT meridian now; had started at 08hrs East COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.5 / temperature: deg C, CE200 box TEMP-HRK= 8.3 / temperature: deg C, heated Rack TEMP-CS1= 1.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008485.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:22:07' / start Universal time ENDTIME = '02:22:36' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '01:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 63.8 / % relative humidity TEMP-DOM= 4.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.6 / temperature: deg C, CE200 box TEMP-HRK= 7.8 / temperature: deg C, heated Rack TEMP-CS1= 1.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008486.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:25:22' / start Universal time ENDTIME = '02:25:51' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '02:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.7 / temperature: deg C, CE200 box TEMP-HRK= 8.6 / temperature: deg C, heated Rack TEMP-CS1= 1.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008487.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:28:23' / start Universal time ENDTIME = '02:28:52' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '03:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT more dome turning before exp COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.8 / temperature: deg C, CE200 box TEMP-HRK= 10.7 / temperature: deg C, heated Rack TEMP-CS1= 1.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 3.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008488.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:30:11' / start Universal time ENDTIME = '02:30:40' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '04:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 26.8 / temperature: deg C, CE200 box TEMP-HRK= 12.3 / temperature: deg C, heated Rack TEMP-CS1= 1.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008489.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:32:36' / start Universal time ENDTIME = '02:33:05' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '05:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.0 / temperature: deg C, CE200 box TEMP-HRK= 14.2 / temperature: deg C, heated Rack TEMP-CS1= 1.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008490.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:35:22' / start Universal time ENDTIME = '02:35:53' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '45:00:00' / Declination, +/-dd:mm:ss HA = '05:50:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT max west COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.1 / temperature: deg C, CE200 box TEMP-HRK= 16.6 / temperature: deg C, heated Rack TEMP-CS1= 1.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008491.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:42:33' / start Universal time ENDTIME = '02:43:02' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '-05:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT starting 05 hrs east;0 dec COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.3 / temperature: deg C, CE200 box TEMP-HRK= 12.2 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008492.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:44:43' / start Universal time ENDTIME = '02:45:12' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '-04:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.3 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008493.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:46:36' / start Universal time ENDTIME = '02:47:04' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '-03:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.2 / temperature: deg C, CE200 box TEMP-HRK= 12.2 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008494.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:49:39' / start Universal time ENDTIME = '02:50:07' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '-02:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.9 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.2 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008495.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:51:40' / start Universal time ENDTIME = '02:52:11' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '-01:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.1 / temperature: deg C, CE200 box TEMP-HRK= 12.1 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 30 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[454:483,1:1024]' / Frame format FILE = 'C0008496.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Tn ' / Name(s) or ID(s) DATE-OBS= '2000-11-18' / Date of start of observation in UTC TIME-OBS= '02:55:16' / start Universal time ENDTIME = '02:55:45' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = '00:00:00' / Declination, +/-dd:mm:ss HA = '00:00:00' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 22.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2748 / telescope focus FOCUSSP = 5.03 / spectrograph focus SLITWID = 200 / slit width in microns SLITLEN = 200 / slit length in microns COMMENT meridian cross COMMENT ccdtemp @01:35 UT ,pinhole 200u flexure test COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66 / % relative humidity TEMP-DOM= 1.8 / temperature: deg C, Dome floor air TEMP-CSE= 2.4 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 2.5 / temperature: deg C, pri air TEMP-CON= 27.0 / temperature: deg C, CE200 box TEMP-HRK= 11.8 / temperature: deg C, heated Rack TEMP-CS1= 1.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 2.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END