***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[351:550,1:1024]' / Frame format FILE = 'C0007897.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-10-30' / Date of start of observation in UTC TIME-OBS= '05:15:08' / start Universal time ENDTIME = '05:15:23' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2767 / telescope focus FOCUSSP = 4.97 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:30UT -100.6 COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 41 / % relative humidity TEMP-DOM= 5.7 / temperature: deg C, Dome floor air TEMP-CSE= 3.3 / temperature: deg C, pri cast TEMP-SEC= 3.2 / temperature: deg C, sec air TEMP-PRI= 3.8 / temperature: deg C, pri air TEMP-CON= 29.1 / temperature: deg C, CE200 box TEMP-HRK= 14.7 / temperature: deg C, heated Rack TEMP-CS1= 4.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[351:550,1:1024]' / Frame format FILE = 'C0007898.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-10-30' / Date of start of observation in UTC TIME-OBS= '05:18:05' / start Universal time ENDTIME = '05:18:22' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2767 / telescope focus FOCUSSP = 4.97 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:30UT -100.6 COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 41 / % relative humidity TEMP-DOM= 5.7 / temperature: deg C, Dome floor air TEMP-CSE= 3.3 / temperature: deg C, pri cast TEMP-SEC= 3.2 / temperature: deg C, sec air TEMP-PRI= 3.8 / temperature: deg C, pri air TEMP-CON= 29.1 / temperature: deg C, CE200 box TEMP-HRK= 13.9 / temperature: deg C, heated Rack TEMP-CS1= 4.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[351:550,1:1024]' / Frame format FILE = 'C0007899.FTS' / File name OBJECT = 'BD+40 45' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-10-30' / Date of start of observation in UTC TIME-OBS= '05:19:56' / start Universal time ENDTIME = '05:37:12' / End time of exposure RA = '00:17:06' / Right Ascension, hh:mm:ss DEC = '40:56:54' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1036 / Exposure time in seconds EXPCOUNT= 1601 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2756 / telescope focus FOCUSSP = 4.97 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT marcy std ;M0;rv=+03.31 COMMENT ccd temp @04:30UT -100.6 COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 41 / % relative humidity TEMP-DOM= 5.7 / temperature: deg C, Dome floor air TEMP-CSE= 3.3 / temperature: deg C, pri cast TEMP-SEC= 2.6 / temperature: deg C, sec air TEMP-PRI= 3.1 / temperature: deg C, pri air TEMP-CON= 29.0 / temperature: deg C, CE200 box TEMP-HRK= 13.2 / temperature: deg C, heated Rack TEMP-CS1= 4.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[351:550,1:1024]' / Frame format FILE = 'C0007900.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-10-30' / Date of start of observation in UTC TIME-OBS= '05:38:15' / start Universal time ENDTIME = '05:38:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2756 / telescope focus FOCUSSP = 4.97 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:30UT -100.6 COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 41 / % relative humidity TEMP-DOM= 5.7 / temperature: deg C, Dome floor air TEMP-CSE= 3.3 / temperature: deg C, pri cast TEMP-SEC= 2.6 / temperature: deg C, sec air TEMP-PRI= 3.1 / temperature: deg C, pri air TEMP-CON= 29.2 / temperature: deg C, CE200 box TEMP-HRK= 9.6 / temperature: deg C, heated Rack TEMP-CS1= 4.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[351:550,1:1024]' / Frame format FILE = 'C0007901.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-10-30' / Date of start of observation in UTC TIME-OBS= '05:42:40' / start Universal time ENDTIME = '05:42:57' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2756 / telescope focus FOCUSSP = 4.97 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @04:30UT -100.6 COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 41 / % relative humidity TEMP-DOM= 5.7 / temperature: deg C, Dome floor air TEMP-CSE= 3.3 / temperature: deg C, pri cast TEMP-SEC= 2.6 / temperature: deg C, sec air TEMP-PRI= 3.1 / temperature: deg C, pri air TEMP-CON= 29.0 / temperature: deg C, CE200 box TEMP-HRK= 8.9 / temperature: deg C, heated Rack TEMP-CS1= 4.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[351:550,1:1024]' / Frame format FILE = 'C0007902.FTS' / File name OBJECT = 'RXJ03241+234' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-10-30' / Date of start of observation in UTC TIME-OBS= '05:45:20' / start Universal time ENDTIME = '06:16:26' / End time of exposure RA = '03:24:06' / Right Ascension, hh:mm:ss DEC = '23:47:12' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1866 / Exposure time in seconds EXPCOUNT= 617 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2754 / telescope focus FOCUSSP = 4.97 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT Southern comp, seeing not very good COMMENT ccd temp @04:30UT -100.6 COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 41 / % relative humidity TEMP-DOM= 5.7 / temperature: deg C, Dome floor air TEMP-CSE= 3 / temperature: deg C, pri cast TEMP-SEC= 2.2 / temperature: deg C, sec air TEMP-PRI= 3.4 / temperature: deg C, pri air TEMP-CON= 28.8 / temperature: deg C, CE200 box TEMP-HRK= 8.6 / temperature: deg C, heated Rack TEMP-CS1= 4.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END