***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007369.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:05:54' / start Universal time ENDTIME = '00:05:56' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 2 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.3 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= 11.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007370.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:08:10' / start Universal time ENDTIME = '00:08:26' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.3 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= 11.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007371.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:12:51' / start Universal time ENDTIME = '00:16:53' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 242 / Exposure time in seconds EXPCOUNT= 75 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.1 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= 11.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007372.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:17:54' / start Universal time ENDTIME = '00:23:00' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 306 / Exposure time in seconds EXPCOUNT= 90 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.2 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= 11.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007373.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:23:21' / start Universal time ENDTIME = '00:28:27' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 306 / Exposure time in seconds EXPCOUNT= 92 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.2 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= 11.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007374.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:28:51' / start Universal time ENDTIME = '00:34:01' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 300.00 / Exposure time in seconds EXPCOUNT= 92 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.0 / temperature: deg C, CE200 box TEMP-HRK= 11.8 / temperature: deg C, heated Rack TEMP-CS1= 11.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007375.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:34:14' / start Universal time ENDTIME = '00:39:23' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 300.00 / Exposure time in seconds EXPCOUNT= 91 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.1 / temperature: deg C, CE200 box TEMP-HRK= 11.7 / temperature: deg C, heated Rack TEMP-CS1= 11.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007376.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:39:37' / start Universal time ENDTIME = '00:44:46' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 300.00 / Exposure time in seconds EXPCOUNT= 92 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 16.1 / temperature: deg C, CE200 box TEMP-HRK= 11.6 / temperature: deg C, heated Rack TEMP-CS1= 11.6 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007377.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:46:19' / start Universal time ENDTIME = '00:46:32' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2712 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 5 / temperature: deg C, pri cast TEMP-SEC= 4.6 / temperature: deg C, sec air TEMP-PRI= 5.3 / temperature: deg C, pri air TEMP-CON= 15.9 / temperature: deg C, CE200 box TEMP-HRK= 11.4 / temperature: deg C, heated Rack TEMP-CS1= 11.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007378.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:48:17' / start Universal time ENDTIME = '00:53:26' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 300.00 / Exposure time in seconds EXPCOUNT= 91 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2693 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 9.8 / temperature: deg C, pri cast TEMP-SEC= 9 / temperature: deg C, sec air TEMP-PRI= 9.9 / temperature: deg C, pri air TEMP-CON= 15.8 / temperature: deg C, CE200 box TEMP-HRK= 11.4 / temperature: deg C, heated Rack TEMP-CS1= 11.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007379.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:53:39' / start Universal time ENDTIME = '00:58:50' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 300.00 / Exposure time in seconds EXPCOUNT= 90 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2693 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 9.8 / temperature: deg C, pri cast TEMP-SEC= 9 / temperature: deg C, sec air TEMP-PRI= 9.9 / temperature: deg C, pri air TEMP-CON= 15.8 / temperature: deg C, CE200 box TEMP-HRK= 11.4 / temperature: deg C, heated Rack TEMP-CS1= 11.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007380.FTS' / File name OBJECT = 'CY Aqr ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki+/WxL' / Name(s) or ID(s) DATE-OBS= '2000-10-12' / Date of start of observation in UTC TIME-OBS= '00:59:04' / start Universal time ENDTIME = '01:04:13' / End time of exposure RA = '22:37:48' / Right Ascension, hh:mm:ss DEC = '01:32:04' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 300.00 / Exposure time in seconds EXPCOUNT= 92 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2693 / telescope focus FOCUSSP = 4.90 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @23:15UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 66.3 / % relative humidity TEMP-DOM= 11.9 / temperature: deg C, Dome floor air TEMP-CSE= 9.8 / temperature: deg C, pri cast TEMP-SEC= 9 / temperature: deg C, sec air TEMP-PRI= 9.9 / temperature: deg C, pri air TEMP-CON= 15.6 / temperature: deg C, CE200 box TEMP-HRK= 11.0 / temperature: deg C, heated Rack TEMP-CS1= 11.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 12.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END