***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007225.FTS' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '2000-10-10' / Date of start of observation in UTC TIME-OBS= '01:34:52' / start Universal time ENDTIME = '01:34:53' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 4.93 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @01:35UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 77.9 / % relative humidity TEMP-DOM= 7.4 / temperature: deg C, Dome floor air TEMP-CSE= 3 / temperature: deg C, pri cast TEMP-SEC= .6 / temperature: deg C, sec air TEMP-PRI= 2 / temperature: deg C, pri air TEMP-CON= 28.8 / temperature: deg C, CE200 box TEMP-HRK= 9.1 / temperature: deg C, heated Rack TEMP-CS1= 4.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007226.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '2000-10-10' / Date of start of observation in UTC TIME-OBS= '01:37:55' / start Universal time ENDTIME = '01:38:09' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2720 / telescope focus FOCUSSP = 4.93 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @01:35UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 77.9 / % relative humidity TEMP-DOM= 7.4 / temperature: deg C, Dome floor air TEMP-CSE= 3 / temperature: deg C, pri cast TEMP-SEC= .6 / temperature: deg C, sec air TEMP-PRI= 2 / temperature: deg C, pri air TEMP-CON= 28.7 / temperature: deg C, CE200 box TEMP-HRK= 8.8 / temperature: deg C, heated Rack TEMP-CS1= 4.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007227.FTS' / File name OBJECT = 'HD187691' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '2000-10-10' / Date of start of observation in UTC TIME-OBS= '01:40:51' / start Universal time ENDTIME = '01:45:23' / End time of exposure RA = '19:46:14' / Right Ascension, hh:mm:ss DEC = '10:09:55' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 272 / Exposure time in seconds EXPCOUNT= 7014 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2721 / telescope focus FOCUSSP = 4.93 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT F8V std vel COMMENT ccd temp @01:35UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 77.9 / % relative humidity TEMP-DOM= 7.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.6 / temperature: deg C, pri cast TEMP-SEC= .2 / temperature: deg C, sec air TEMP-PRI= 1.7 / temperature: deg C, pri air TEMP-CON= 28.7 / temperature: deg C, CE200 box TEMP-HRK= 9.4 / temperature: deg C, heated Rack TEMP-CS1= 4.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007228.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '2000-10-10' / Date of start of observation in UTC TIME-OBS= '01:47:41' / start Universal time ENDTIME = '01:47:54' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2721 / telescope focus FOCUSSP = 4.93 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @01:35UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 77.9 / % relative humidity TEMP-DOM= 7.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.6 / temperature: deg C, pri cast TEMP-SEC= .2 / temperature: deg C, sec air TEMP-PRI= 1.7 / temperature: deg C, pri air TEMP-CON= 29.1 / temperature: deg C, CE200 box TEMP-HRK= 14.6 / temperature: deg C, heated Rack TEMP-CS1= 4.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007229.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '2000-10-10' / Date of start of observation in UTC TIME-OBS= '01:56:57' / start Universal time ENDTIME = '01:57:13' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2721 / telescope focus FOCUSSP = 4.93 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @01:35UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 77.9 / % relative humidity TEMP-DOM= 7.4 / temperature: deg C, Dome floor air TEMP-CSE= 2.6 / temperature: deg C, pri cast TEMP-SEC= .2 / temperature: deg C, sec air TEMP-PRI= 1.7 / temperature: deg C, pri air TEMP-CON= 29.1 / temperature: deg C, CE200 box TEMP-HRK= 14.6 / temperature: deg C, heated Rack TEMP-CS1= 4.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0007230.FTS' / File name OBJECT = 'HIP3432 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '2000-10-10' / Date of start of observation in UTC TIME-OBS= '01:58:53' / start Universal time ENDTIME = '02:03:59' / End time of exposure RA = '00:43:48' / Right Ascension, hh:mm:ss DEC = '42:16:56' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 306 / Exposure time in seconds EXPCOUNT= 312 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 47.02 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2761 / telescope focus FOCUSSP = 4.93 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT 1-2 sec seeing;thin cloud COMMENT ccd temp @01:35UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 77.9 / % relative humidity TEMP-DOM= 7.4 / temperature: deg C, Dome floor air TEMP-CSE= 1.8 / temperature: deg C, pri cast TEMP-SEC= 1.2 / temperature: deg C, sec air TEMP-PRI= 1.7 / temperature: deg C, pri air TEMP-CON= 29.0 / temperature: deg C, CE200 box TEMP-HRK= 14.3 / temperature: deg C, heated Rack TEMP-CS1= 4.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 5.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END