***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0005930.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rci]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-08-30' / Date of start of observation in UTC TIME-OBS= '01:00:58' / start Universal time ENDTIME = '01:01:11' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2696 / telescope focus FOCUSSP = 4.75 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 69.2 / % relative humidity TEMP-DOM= 22.6 / temperature: deg C, Dome floor air TEMP-CSE= 13.7 / temperature: deg C, pri cast TEMP-SEC= 12.5 / temperature: deg C, sec air TEMP-PRI= 13.1 / temperature: deg C, pri air TEMP-CON= 28.9 / temperature: deg C, CE200 box TEMP-HRK= 24.1 / temperature: deg C, heated Rack TEMP-CS1= 23.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 23.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0005931.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rci]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-08-30' / Date of start of observation in UTC TIME-OBS= '01:21:58' / start Universal time ENDTIME = '01:22:11' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2661 / telescope focus FOCUSSP = 4.75 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 69.2 / % relative humidity TEMP-DOM= 22.6 / temperature: deg C, Dome floor air TEMP-CSE= 19.3 / temperature: deg C, pri cast TEMP-SEC= 20.1 / temperature: deg C, sec air TEMP-PRI= 20.2 / temperature: deg C, pri air TEMP-CON= 28.6 / temperature: deg C, CE200 box TEMP-HRK= 23.8 / temperature: deg C, heated Rack TEMP-CS1= 23.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 23.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0005932.FTS' / File name OBJECT = 'FI Boo ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Rci]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-08-30' / Date of start of observation in UTC TIME-OBS= '01:25:00' / start Universal time ENDTIME = '01:37:02' / End time of exposure RA = '15:22:06' / Right Ascension, hh:mm:ss DEC = '51:10:55' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 722 / Exposure time in seconds EXPCOUNT= 373 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2661 / telescope focus FOCUSSP = 4.75 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 69.2 / % relative humidity TEMP-DOM= 22.6 / temperature: deg C, Dome floor air TEMP-CSE= 19.3 / temperature: deg C, pri cast TEMP-SEC= 20.1 / temperature: deg C, sec air TEMP-PRI= 20.2 / temperature: deg C, pri air TEMP-CON= 28.5 / temperature: deg C, CE200 box TEMP-HRK= 23.7 / temperature: deg C, heated Rack TEMP-CS1= 22.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 23.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0005933.FTS' / File name OBJECT = 'FI Boo ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Rci]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-08-30' / Date of start of observation in UTC TIME-OBS= '01:37:18' / start Universal time ENDTIME = '01:49:21' / End time of exposure RA = '15:22:06' / Right Ascension, hh:mm:ss DEC = '51:10:55' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 723 / Exposure time in seconds EXPCOUNT= 426 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2661 / telescope focus FOCUSSP = 4.75 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 69.2 / % relative humidity TEMP-DOM= 22.6 / temperature: deg C, Dome floor air TEMP-CSE= 19.3 / temperature: deg C, pri cast TEMP-SEC= 20.1 / temperature: deg C, sec air TEMP-PRI= 20.2 / temperature: deg C, pri air TEMP-CON= 28.4 / temperature: deg C, CE200 box TEMP-HRK= 23.6 / temperature: deg C, heated Rack TEMP-CS1= 22.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 23.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0005934.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Rci]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-08-30' / Date of start of observation in UTC TIME-OBS= '01:50:05' / start Universal time ENDTIME = '01:50:17' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2661 / telescope focus FOCUSSP = 4.75 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 69.2 / % relative humidity TEMP-DOM= 22.6 / temperature: deg C, Dome floor air TEMP-CSE= 19.3 / temperature: deg C, pri cast TEMP-SEC= 20.1 / temperature: deg C, sec air TEMP-PRI= 20.2 / temperature: deg C, pri air TEMP-CON= 28.1 / temperature: deg C, CE200 box TEMP-HRK= 23.3 / temperature: deg C, heated Rack TEMP-CS1= 22.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 23.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[366:565,1:1024]' / Frame format FILE = 'C0005935.FTS' / File name OBJECT = 'FI Boo ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Rci]/Tn/WxL' / Name(s) or ID(s) DATE-OBS= '2000-08-30' / Date of start of observation in UTC TIME-OBS= '01:51:06' / start Universal time ENDTIME = '02:03:32' / End time of exposure RA = '15:22:06' / Right Ascension, hh:mm:ss DEC = '51:10:55' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 746 / Exposure time in seconds EXPCOUNT= 390 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5184 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2661 / telescope focus FOCUSSP = 4.75 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @00:30UT -100.5C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 69.2 / % relative humidity TEMP-DOM= 22.6 / temperature: deg C, Dome floor air TEMP-CSE= 19.3 / temperature: deg C, pri cast TEMP-SEC= 20.1 / temperature: deg C, sec air TEMP-PRI= 20.2 / temperature: deg C, pri air TEMP-CON= 28.2 / temperature: deg C, CE200 box TEMP-HRK= 23.2 / temperature: deg C, heated Rack TEMP-CS1= 22.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 23.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END