***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000251.FTS' / File name OBJECT = 'HD87901 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:01:37' / start Universal time ENDTIME = '02:05:36' / End time of exposure RA = '10:03:03' / Right Ascension, hh:mm:ss DEC = '12:27:22' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 239 / Exposure time in seconds EXPCOUNT= 2091 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 700u / slit length in microns COMMENT telluric std COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 19.0 / temperature: deg C, CE200 box TEMP-HRK= 14.6 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.2 / temperature: deg C, Eche, position1 TEMP-EC2= 17.2 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000252.FTS' / File name OBJECT = 'HD87901 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:01:37' / start Universal time ENDTIME = '02:05:36' / End time of exposure RA = '10:03:03' / Right Ascension, hh:mm:ss DEC = '12:27:22' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 239 / Exposure time in seconds EXPCOUNT= 2091 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT telluric std COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 19.0 / temperature: deg C, CE200 box TEMP-HRK= 14.6 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.2 / temperature: deg C, Eche, position1 TEMP-EC2= 17.2 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000253.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:09:07' / start Universal time ENDTIME = '02:09:26' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 19.0 / temperature: deg C, CE200 box TEMP-HRK= 14.5 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.2 / temperature: deg C, Eche, position1 TEMP-EC2= 17.2 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000254.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:12:22' / start Universal time ENDTIME = '02:12:41' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 18.8 / temperature: deg C, CE200 box TEMP-HRK= 14.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.2 / temperature: deg C, Eche, position1 TEMP-EC2= 17.2 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000255.FTS' / File name OBJECT = 'HD112413' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:13:32' / start Universal time ENDTIME = '02:24:53' / End time of exposure RA = '12:51:21' / Right Ascension, hh:mm:ss DEC = '38:51:30' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 681 / Exposure time in seconds EXPCOUNT= 1841 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 18.8 / temperature: deg C, CE200 box TEMP-HRK= 14.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.2 / temperature: deg C, Eche, position1 TEMP-EC2= 17.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000256.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:25:52' / start Universal time ENDTIME = '02:26:11' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 18.6 / temperature: deg C, CE200 box TEMP-HRK= 14.1 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.1 / temperature: deg C, Eche, position1 TEMP-EC2= 17.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000257.FTS' / File name OBJECT = 'HD112413' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:28:57' / start Universal time ENDTIME = '02:41:27' / End time of exposure RA = '12:51:21' / Right Ascension, hh:mm:ss DEC = '38:51:30' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 750 / Exposure time in seconds EXPCOUNT= 1986 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 18.5 / temperature: deg C, CE200 box TEMP-HRK= 14.0 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.1 / temperature: deg C, Eche, position1 TEMP-EC2= 17.0 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000258.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:43:18' / start Universal time ENDTIME = '02:43:37' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 18.4 / temperature: deg C, CE200 box TEMP-HRK= 14.0 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 17.0 / temperature: deg C, Eche, position1 TEMP-EC2= 16.9 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000259.FTS' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:44:17' / start Universal time ENDTIME = '02:44:17' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT average of 4 biases COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 18.3 / temperature: deg C, CE200 box TEMP-HRK= 14.0 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.7 / temperature: deg C, Eche, position1 TEMP-EC2= 16.6 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000260.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:50:13' / start Universal time ENDTIME = '02:50:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2157 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 14 / temperature: deg C, pri cast TEMP-SEC= 12.4 / temperature: deg C, sec air TEMP-PRI= 13.3 / temperature: deg C, pri air TEMP-CON= 18.1 / temperature: deg C, CE200 box TEMP-HRK= 13.7 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.6 / temperature: deg C, Eche, position1 TEMP-EC2= 16.5 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000261.FTS' / File name OBJECT = 'HD118022' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-06-05' / Date of start of observation in UTC TIME-OBS= '02:51:04' / start Universal time ENDTIME = '03:11:49' / End time of exposure RA = '13:29:04' / Right Ascension, hh:mm:ss DEC = '04:10:21' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1245 / Exposure time in seconds EXPCOUNT= 186 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6725 / Central wavelength for observation GRATING = 31.6 / Grating description, lines/mm GTILT = 19.45 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .2750 / Cross Grating Tilt, degrees FOCUSTEL= 2164 / telescope focus FOCUSSP = .530 / spectrograph focus SLITWID = 60u / slit width in microns SLITLEN = 500u / slit length in microns COMMENT 1 sec seeing;but some cloud COMMENT Set up 01:30UT; CCD T= -101.0 COMMENT slitlen 500=.215 stellar,700u=.195 for flats;slitwid 60u=.277 this wh INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 57 / % relative humidity TEMP-DOM= 12 / temperature: deg C, Dome floor air TEMP-CSE= 13.3 / temperature: deg C, pri cast TEMP-SEC= 11.1 / temperature: deg C, sec air TEMP-PRI= 12.4 / temperature: deg C, pri air TEMP-CON= 18.1 / temperature: deg C, CE200 box TEMP-HRK= 13.7 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.5 / temperature: deg C, Eche, position1 TEMP-EC2= 16.5 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END