***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000114.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Pap/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-31' / Date of start of observation in UTC TIME-OBS= '04:16:52' / start Universal time ENDTIME = '04:17:14' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 2.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6101 / Central wavelength for observation GRATING = echelle / Grating description, lines/mm GTILT = 18.20 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .33 / Cross Grating Tilt, degrees FOCUSTEL= 2170 / telescope focus FOCUSSP = .540 / spectrograph focus SLITWID = .272 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT COMMENT Set up 04:20UT; CCD T= -99.6 after topup COMMENT slitlen 500=.215 stellar,700u=.195 for flats;all comments now correct INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 14.3 / temperature: deg C, pri cast TEMP-SEC= 12.5 / temperature: deg C, sec air TEMP-PRI= 13.7 / temperature: deg C, pri air TEMP-CON= 18.9 / temperature: deg C, CE200 box TEMP-HRK= 14.8 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.8 / temperature: deg C, Eche, position1 TEMP-EC2= 16.6 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000115.FTS' / File name OBJECT = 'HD138918' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Pap/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-31' / Date of start of observation in UTC TIME-OBS= '04:17:46' / start Universal time ENDTIME = '04:32:27' / End time of exposure RA = '15:30:01' / Right Ascension, hh:mm:ss DEC = '10:52:23' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 881 / Exposure time in seconds EXPCOUNT= 176 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6101 / Central wavelength for observation GRATING = echelle / Grating description, lines/mm GTILT = 18.20 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .33 / Cross Grating Tilt, degrees FOCUSTEL= 2170 / telescope focus FOCUSSP = .540 / spectrograph focus SLITWID = .272 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT 3 sec seeing;ok separation of south component;some cloud COMMENT Set up 04:20UT; CCD T= -99.6 after topup COMMENT slitlen 500=.215 stellar,700u=.195 for flats;all comments now correct INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 14.3 / temperature: deg C, pri cast TEMP-SEC= 12.5 / temperature: deg C, sec air TEMP-PRI= 13.7 / temperature: deg C, pri air TEMP-CON= 18.9 / temperature: deg C, CE200 box TEMP-HRK= 14.8 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.7 / temperature: deg C, Eche, position1 TEMP-EC2= 16.5 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000116.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Pap/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-31' / Date of start of observation in UTC TIME-OBS= '04:33:27' / start Universal time ENDTIME = '04:33:47' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 2.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6101 / Central wavelength for observation GRATING = echelle / Grating description, lines/mm GTILT = 18.20 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .33 / Cross Grating Tilt, degrees FOCUSTEL= 2170 / telescope focus FOCUSSP = .540 / spectrograph focus SLITWID = .272 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT COMMENT Set up 04:20UT; CCD T= -99.6 after topup COMMENT slitlen 500=.215 stellar,700u=.195 for flats;all comments now correct INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 14.3 / temperature: deg C, pri cast TEMP-SEC= 12.5 / temperature: deg C, sec air TEMP-PRI= 13.7 / temperature: deg C, pri air TEMP-CON= 19.0 / temperature: deg C, CE200 box TEMP-HRK= 14.5 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.7 / temperature: deg C, Eche, position1 TEMP-EC2= 16.5 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000117.FTS' / File name OBJECT = 'HD138918' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Pap/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-31' / Date of start of observation in UTC TIME-OBS= '04:34:35' / start Universal time ENDTIME = '04:47:53' / End time of exposure RA = '15:30:01' / Right Ascension, hh:mm:ss DEC = '10:52:23' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 798 / Exposure time in seconds EXPCOUNT= 119 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6101 / Central wavelength for observation GRATING = echelle / Grating description, lines/mm GTILT = 18.20 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .33 / Cross Grating Tilt, degrees FOCUSTEL= 2170 / telescope focus FOCUSSP = .540 / spectrograph focus SLITWID = .272 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT COMMENT Set up 04:20UT; CCD T= -99.6 after topup COMMENT slitlen 500=.215 stellar,700u=.195 for flats;all comments now correct INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 14.3 / temperature: deg C, pri cast TEMP-SEC= 12.5 / temperature: deg C, sec air TEMP-PRI= 13.7 / temperature: deg C, pri air TEMP-CON= 18.9 / temperature: deg C, CE200 box TEMP-HRK= 14.5 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.6 / temperature: deg C, Eche, position1 TEMP-EC2= 16.4 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000118.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Pap/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-31' / Date of start of observation in UTC TIME-OBS= '04:51:09' / start Universal time ENDTIME = '04:51:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 2.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6101 / Central wavelength for observation GRATING = echelle / Grating description, lines/mm GTILT = 18.20 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .33 / Cross Grating Tilt, degrees FOCUSTEL= 2170 / telescope focus FOCUSSP = .540 / spectrograph focus SLITWID = .272 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT COMMENT Set up 04:20UT; CCD T= -99.6 after topup COMMENT slitlen 500=.215 stellar,700u=.195 for flats;all comments now correct INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 14.3 / temperature: deg C, pri cast TEMP-SEC= 12.5 / temperature: deg C, sec air TEMP-PRI= 13.7 / temperature: deg C, pri air TEMP-CON= 18.8 / temperature: deg C, CE200 box TEMP-HRK= 14.5 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.5 / temperature: deg C, Eche, position1 TEMP-EC2= 16.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000119.FTS' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Pap/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-31' / Date of start of observation in UTC TIME-OBS= '04:52:55' / start Universal time ENDTIME = '04:52:56' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6101 / Central wavelength for observation GRATING = echelle / Grating description, lines/mm GTILT = 18.20 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .33 / Cross Grating Tilt, degrees FOCUSTEL= 2170 / telescope focus FOCUSSP = .540 / spectrograph focus SLITWID = .272 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT average of 4 biases COMMENT Set up 04:20UT; CCD T= -99.6 after topup COMMENT slitlen 500=.215 stellar,700u=.195 for flats;all comments now correct INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= 14.3 / temperature: deg C, pri cast TEMP-SEC= 12.5 / temperature: deg C, sec air TEMP-PRI= 13.7 / temperature: deg C, pri air TEMP-CON= 18.6 / temperature: deg C, CE200 box TEMP-HRK= 14.4 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 16.2 / temperature: deg C, Eche, position1 TEMP-EC2= 16.0 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END