***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = / Fastest varying axis in array NAXIS2 = / Next axis CCDSEG = ' ' / Frame format FILE = 'C0003741.FTS' / File name OBJECT = 'ceres ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'CCC/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-16' / Date of start of observation in UTC TIME-OBS= '03:30:23' / start Universal time ENDTIME = '03:29:51' / End time of exposure RA = '12:04:45' / Right Ascension, hh:mm:ss DEC = '13:29:51' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 600C / Grating description, lines/mm GTILT = 25.27 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = / spectrograph focus SLITWID = / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @01:00 UT -101.7C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 14.0 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= 10.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0003741.FTS' / File name OBJECT = 'ceres ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'CCC/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-16' / Date of start of observation in UTC TIME-OBS= '03:30:23' / start Universal time ENDTIME = '03:29:51' / End time of exposure RA = '12:04:45' / Right Ascension, hh:mm:ss DEC = '13:29:51' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 600C / Grating description, lines/mm GTILT = 25.27 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = / spectrograph focus SLITWID = / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @01:00 UT -101.7C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 14.0 / temperature: deg C, CE200 box TEMP-HRK= 9.5 / temperature: deg C, heated Rack TEMP-CS1= 10.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 11.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0003742.FTS' / File name OBJECT = 'ceres ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'CCC/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-16' / Date of start of observation in UTC TIME-OBS= '03:30:23' / start Universal time ENDTIME = '03:50:53' / End time of exposure RA = '12:04:45' / Right Ascension, hh:mm:ss DEC = '13:29:51' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1230 / Exposure time in seconds EXPCOUNT= 3877 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 600C / Grating description, lines/mm GTILT = 25.27 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = / spectrograph focus SLITWID = / slit width in microns SLITLEN = / slit length in microns COMMENT 1-2 sec seeing COMMENT ccd temp @01:00 UT -101.7C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 13.9 / temperature: deg C, CE200 box TEMP-HRK= 9.3 / temperature: deg C, heated Rack TEMP-CS1= 9.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 11.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0003743.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'CCC/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-16' / Date of start of observation in UTC TIME-OBS= '03:52:40' / start Universal time ENDTIME = '03:52:52' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 600C / Grating description, lines/mm GTILT = 25.27 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = / spectrograph focus SLITWID = / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @01:00 UT -101.7C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 13.6 / temperature: deg C, CE200 box TEMP-HRK= 9.0 / temperature: deg C, heated Rack TEMP-CS1= 9.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 11.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[381:580,1:1024]' / Frame format FILE = 'C0003744.FTS' / File name OBJECT = 'star near ceres' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'CCC/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-05-16' / Date of start of observation in UTC TIME-OBS= '03:56:34' / start Universal time ENDTIME = '04:00:37' / End time of exposure RA = '12:05:03' / Right Ascension, hh:mm:ss DEC = '13:26:33' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 243 / Exposure time in seconds EXPCOUNT= 1177 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 600C / Grating description, lines/mm GTILT = 25.27 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = / spectrograph focus SLITWID = / slit width in microns SLITLEN = / slit length in microns COMMENT slightly brighter then ceres and ESE 5 arc mins from ceres COMMENT ccd temp @01:00 UT -101.7C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= / % relative humidity TEMP-DOM= / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 13.6 / temperature: deg C, CE200 box TEMP-HRK= 9.1 / temperature: deg C, heated Rack TEMP-CS1= 9.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 11.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END