***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'C0002292.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-04-10' / Date of start of observation in UTC TIME-OBS= '04:07:40' / start Universal time ENDTIME = '04:07:51' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2775 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @01:00 UT -100.3 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 52 / % relative humidity TEMP-DOM= 1.0 / temperature: deg C, Dome floor air TEMP-CSE= -3.5 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.4 / temperature: deg C, pri air TEMP-CON= 25.3 / temperature: deg C, CE200 box TEMP-HRK= 15.2 / temperature: deg C, heated Rack TEMP-CS1= -0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'C0002293.FTS' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-04-10' / Date of start of observation in UTC TIME-OBS= '04:10:33' / start Universal time ENDTIME = '04:10:34' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2775 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @01:00 UT -100.3 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 52 / % relative humidity TEMP-DOM= 1.0 / temperature: deg C, Dome floor air TEMP-CSE= -3.5 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.4 / temperature: deg C, pri air TEMP-CON= 25.2 / temperature: deg C, CE200 box TEMP-HRK= 13.0 / temperature: deg C, heated Rack TEMP-CS1= -0.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'C0002294.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-04-10' / Date of start of observation in UTC TIME-OBS= '04:14:06' / start Universal time ENDTIME = '04:14:17' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2775 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @01:00 UT -100.3 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 52 / % relative humidity TEMP-DOM= 1.0 / temperature: deg C, Dome floor air TEMP-CSE= -3.5 / temperature: deg C, pri cast TEMP-SEC= -4.1 / temperature: deg C, sec air TEMP-PRI= -3.4 / temperature: deg C, pri air TEMP-CON= 25.1 / temperature: deg C, CE200 box TEMP-HRK= 11.9 / temperature: deg C, heated Rack TEMP-CS1= -0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'C0002295.FTS' / File name OBJECT = 'RXJ12214+303' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-04-10' / Date of start of observation in UTC TIME-OBS= '04:16:45' / start Universal time ENDTIME = '04:46:48' / End time of exposure RA = '12:21:27' / Right Ascension, hh:mm:ss DEC = '30:38:42' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1803 / Exposure time in seconds EXPCOUNT= 1243 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2773 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT West (left on slit) component. COMMENT ccd temp @01:00 UT -100.3 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 52 / % relative humidity TEMP-DOM= 1.0 / temperature: deg C, Dome floor air TEMP-CSE= -3.6 / temperature: deg C, pri cast TEMP-SEC= -4.4 / temperature: deg C, sec air TEMP-PRI= -3.5 / temperature: deg C, pri air TEMP-CON= 25.1 / temperature: deg C, CE200 box TEMP-HRK= 10.9 / temperature: deg C, heated Rack TEMP-CS1= -0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'C0002296.FTS' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-04-10' / Date of start of observation in UTC TIME-OBS= '04:48:36' / start Universal time ENDTIME = '04:48:48' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2773 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @01:00 UT -100.3 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 52 / % relative humidity TEMP-DOM= 1.0 / temperature: deg C, Dome floor air TEMP-CSE= -3.6 / temperature: deg C, pri cast TEMP-SEC= -4.4 / temperature: deg C, sec air TEMP-PRI= -3.5 / temperature: deg C, pri air TEMP-CON= 25.5 / temperature: deg C, CE200 box TEMP-HRK= 12.9 / temperature: deg C, heated Rack TEMP-CS1= -0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 1.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'C0002297.FTS' / File name OBJECT = 'RXJ12214+303' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Tn ' / Name(s) or ID(s) DATE-OBS= '2000-04-10' / Date of start of observation in UTC TIME-OBS= '04:50:45' / start Universal time ENDTIME = '05:22:27' / End time of exposure RA = '12:21:27' / Right Ascension, hh:mm:ss DEC = '30:38:42' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1902 / Exposure time in seconds EXPCOUNT= 2245 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6600 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2772 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT ESE(rhs on slit) of pair. COMMENT ccd temp @01:00 UT -100.3 C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 52 / % relative humidity TEMP-DOM= 1.0 / temperature: deg C, Dome floor air TEMP-CSE= -3.8 / temperature: deg C, pri cast TEMP-SEC= -4.2 / temperature: deg C, sec air TEMP-PRI= -3.6 / temperature: deg C, pri air TEMP-CON= 25.5 / temperature: deg C, CE200 box TEMP-HRK= 12.0 / temperature: deg C, heated Rack TEMP-CS1= -0.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 0.9 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END