***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000031.FTS' / File name OBJECT = ' ' / Image name IMAGETYP= ' ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= ' ' / Date of start of observation in UTC TIME-OBS= ' ' / start Universal time ENDTIME = ' ' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT inboard focus COMMENT Set up 22:20UT; CCD T= -100.3C COMMENT slitlen 400=.225 stellar,500u=.215 for flats INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54 / % relative humidity TEMP-DOM= -0.3 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 21.8 / temperature: deg C, CE200 box TEMP-HRK= 9.3 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 0.7 / temperature: deg C, Eche, position1 TEMP-EC2= 0.6 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000031.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-17' / Date of start of observation in UTC TIME-OBS= '22:38:31' / start Universal time ENDTIME = '22:38:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT average of 4 biases COMMENT Set up 22:20UT; CCD T= -100.3C COMMENT slitlen 400=.225 stellar,500u=.215 for flats INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54 / % relative humidity TEMP-DOM= -0.3 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 22.0 / temperature: deg C, CE200 box TEMP-HRK= 12.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -0.0 / temperature: deg C, Eche, position1 TEMP-EC2= -0.1 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000032.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-17' / Date of start of observation in UTC TIME-OBS= '22:56:47' / start Universal time ENDTIME = '22:56:49' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = / Equinox EXPTIME = 1.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT COMMENT Set up 22:20UT; CCD T= -100.3C COMMENT slitlen 400=.225 stellar,500u=.215 for flats INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54 / % relative humidity TEMP-DOM= -0.3 / temperature: deg C, Dome floor air TEMP-CSE= / temperature: deg C, pri cast TEMP-SEC= / temperature: deg C, sec air TEMP-PRI= / temperature: deg C, pri air TEMP-CON= 22.2 / temperature: deg C, CE200 box TEMP-HRK= 10.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -0.6 / temperature: deg C, Eche, position1 TEMP-EC2= -0.6 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000033.FTS' / File name OBJECT = 'HD172167' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Wde/Tn ' / Name(s) or ID(s) DATE-OBS= '1999-12-17' / Date of start of observation in UTC TIME-OBS= '22:58:52' / start Universal time ENDTIME = '23:01:49' / End time of exposure RA = '18:33:33' / Right Ascension, hh:mm:ss DEC = '38:41:26' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 177 / Exposure time in seconds EXPCOUNT= 3217 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= 2205 / telescope focus FOCUSSP = .220 / spectrograph focus SLITWID = 60 / slit width in microns SLITLEN = 400 / slit length in microns COMMENT part cloudy COMMENT Set up 22:20UT; CCD T= -100.3C COMMENT slitlen 400=.225 stellar,500u=.215 for flats INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 54 / % relative humidity TEMP-DOM= -0.3 / temperature: deg C, Dome floor air TEMP-CSE= -1.6 / temperature: deg C, pri cast TEMP-SEC= -3 / temperature: deg C, sec air TEMP-PRI= -2 / temperature: deg C, pri air TEMP-CON= 22.3 / temperature: deg C, CE200 box TEMP-HRK= 9.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= -0.6 / temperature: deg C, Eche, position1 TEMP-EC2= -0.6 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell END