***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000021.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Wde]/Bla/WxL' / Name(s) or ID(s) DATE-OBS= '1999-12-14' / Date of start of observation in UTC TIME-OBS= '04:36:01' / start Universal time ENDTIME = '04:36:21' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 2.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= 2205 / telescope focus FOCUSSP = .230 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT COMMENT Set up 22:20UT; CCD T= -100.0C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 80 / % relative humidity TEMP-DOM= 1.1 / temperature: deg C, Dome floor air TEMP-CSE= -1.6 / temperature: deg C, pri cast TEMP-SEC= -3 / temperature: deg C, sec air TEMP-PRI= -2 / temperature: deg C, pri air TEMP-CON= 24.4 / temperature: deg C, CE200 box TEMP-HRK= 12.0 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 1.5 / temperature: deg C, Eche, position1 TEMP-EC2= 1.3 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000022.FTS' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[Wde]/Bla/WxL' / Name(s) or ID(s) DATE-OBS= '1999-12-14' / Date of start of observation in UTC TIME-OBS= '04:37:20' / start Universal time ENDTIME = '04:37:20' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= 2205 / telescope focus FOCUSSP = .230 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT average of 4 biases COMMENT Set up 22:20UT; CCD T= -100.0C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 80 / % relative humidity TEMP-DOM= 1.1 / temperature: deg C, Dome floor air TEMP-CSE= -1.6 / temperature: deg C, pri cast TEMP-SEC= -3 / temperature: deg C, sec air TEMP-PRI= -2 / temperature: deg C, pri air TEMP-CON= 24.5 / temperature: deg C, CE200 box TEMP-HRK= 10.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 1.0 / temperature: deg C, Eche, position1 TEMP-EC2= 0.8 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000023.FTS' / File name OBJECT = 'tHar ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[Wde]/Bla/WxL' / Name(s) or ID(s) DATE-OBS= '1999-12-14' / Date of start of observation in UTC TIME-OBS= '04:45:38' / start Universal time ENDTIME = '04:45:58' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 2.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= 2205 / telescope focus FOCUSSP = .230 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT COMMENT Set up 22:20UT; CCD T= -100.0C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 80 / % relative humidity TEMP-DOM= 1.1 / temperature: deg C, Dome floor air TEMP-CSE= -1.6 / temperature: deg C, pri cast TEMP-SEC= -3 / temperature: deg C, sec air TEMP-PRI= -2 / temperature: deg C, pri air TEMP-CON= 23.8 / temperature: deg C, CE200 box TEMP-HRK= 8.8 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 0.9 / temperature: deg C, Eche, position1 TEMP-EC2= 0.7 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 256 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[1:1024,1:1024]' / Frame format FILE = 'E0000024.FTS' / File name OBJECT = 'HD32549 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[Wde]/Bla/WxL' / Name(s) or ID(s) DATE-OBS= '1999-12-14' / Date of start of observation in UTC TIME-OBS= '04:48:28' / start Universal time ENDTIME = '05:48:47' / End time of exposure RA = '4:58:51 ' / Right Ascension, hh:mm:ss DEC = '15:15:54' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 3619 / Exposure time in seconds EXPCOUNT= 1019 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4540 / Central wavelength for observation GRATING = 31.60 / Grating description, lines/mm GTILT = 18.00 / Grating Tilt, degrees XGRATING= 0600 / Cross Grating, lines/mm XGTILT = .4600 / Cross Grating Tilt, degrees FOCUSTEL= 2205 / telescope focus FOCUSSP = .230 / spectrograph focus SLITWID = .277 / slit width in microns SLITLEN = .225 / slit length in microns COMMENT the south component of the double COMMENT Set up 22:20UT; CCD T= -100.0C COMMENT width=60 microns, length=400 microns for stellar frames INSTRUME= 'echelle-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v7.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 80 / % relative humidity TEMP-DOM= 1.1 / temperature: deg C, Dome floor air TEMP-CSE= -1.6 / temperature: deg C, pri cast TEMP-SEC= -3 / temperature: deg C, sec air TEMP-PRI= -2 / temperature: deg C, pri air TEMP-CON= 23.8 / temperature: deg C, CE200 box TEMP-HRK= 7.9 / temperature: deg C, heated Rack TEMP-CS1= / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= / temperature: deg C, Cass, position2 TEMP-EC1= 0.7 / temperature: deg C, Eche, position1 TEMP-EC2= 0.5 / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï