***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68892.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:01:33' / start Universal time ENDTIME = '10:01:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2724 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.3 / temperature: deg C, pri cast TEMP-SEC= 7.6 / temperature: deg C, sec air TEMP-PRI= 8.1 / temperature: deg C, pri air TEMP-CON= 14.2 / temperature: deg C, CE200 box TEMP-HRK= 10.0 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68893.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:10:41' / start Universal time ENDTIME = '10:10:52' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2724 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7.3 / temperature: deg C, pri cast TEMP-SEC= 7.6 / temperature: deg C, sec air TEMP-PRI= 8.1 / temperature: deg C, pri air TEMP-CON= 13.9 / temperature: deg C, CE200 box TEMP-HRK= 10.1 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68894.fts' / File name OBJECT = 'HD64511 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:11:58' / start Universal time ENDTIME = '10:20:40' / End time of exposure RA = '7:49:12 ' / Right Ascension, hh:mm:ss DEC = '22:16:00' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 522 / Exposure time in seconds EXPCOUNT= 496 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT no field used. Maybe correct object COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.0 / temperature: deg C, CE200 box TEMP-HRK= 10.2 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68895.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:24:05' / start Universal time ENDTIME = '10:24:16' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 10.2 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68896.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:26:21' / start Universal time ENDTIME = '10:26:36' / End time of exposure RA = '5:21:01 ' / Right Ascension, hh:mm:ss DEC = '34:23:27' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.2 / temperature: deg C, CE200 box TEMP-HRK= 10.2 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68897.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:27:13' / start Universal time ENDTIME = '10:27:29' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.3 / temperature: deg C, CE200 box TEMP-HRK= 10.3 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68898.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:27:38' / start Universal time ENDTIME = '10:27:53' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.3 / temperature: deg C, CE200 box TEMP-HRK= 10.4 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68899.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:28:02' / start Universal time ENDTIME = '10:28:17' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.3 / temperature: deg C, CE200 box TEMP-HRK= 10.2 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68900.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:28:26' / start Universal time ENDTIME = '10:28:41' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 10.3 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68901.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:28:50' / start Universal time ENDTIME = '10:29:05' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 10.4 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68902.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:29:14' / start Universal time ENDTIME = '10:29:29' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 10.3 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68903.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:29:38' / start Universal time ENDTIME = '10:29:53' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.4 / temperature: deg C, CE200 box TEMP-HRK= 10.3 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68904.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:30:02' / start Universal time ENDTIME = '10:30:17' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.3 / temperature: deg C, CE200 box TEMP-HRK= 10.3 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[446:645,1:1024]' / Frame format FILE = 'CC68905.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Mki/Ast325/Tn' / Name(s) or ID(s) DATE-OBS= '16/10/99' / Universal Date: DD/MM/YY TIME-OBS= '10:30:26' / start Universal time ENDTIME = '10:30:41' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 5580 / Central wavelength for observation GRATING = 0100 / Grating description, lines/mm GTILT = 19.35 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2700 / telescope focus FOCUSSP = 5.34 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @08:10UT -101.0C 1320 V for exp meter COMMENT source with added 1.2 ND filter INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 70 / % relative humidity TEMP-DOM= 10.2 / temperature: deg C, Dome floor air TEMP-CSE= 7 / temperature: deg C, pri cast TEMP-SEC= 7.7 / temperature: deg C, sec air TEMP-PRI= 7.8 / temperature: deg C, pri air TEMP-CON= 14.3 / temperature: deg C, CE200 box TEMP-HRK= 10.4 / temperature: deg C, heated Rack TEMP-CS1= 9.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï