***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC68791.fts' / File name OBJECT = 'HD192954' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'CCC/MG/Tn' / Name(s) or ID(s) DATE-OBS= '13/10/99' / Universal Date: DD/MM/YY TIME-OBS= '01:07:05' / start Universal time ENDTIME = '01:26:18' / End time of exposure RA = '20:12:36' / Right Ascension, hh:mm:ss DEC = '15:33:00' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1153 / Exposure time in seconds EXPCOUNT= 2988 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 0600 / Grating description, lines/mm GTILT = 25.31 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2742 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT some cloud,3-5 sec seeing COMMENT ccdtemp @00:30UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= 9.7 / temperature: deg C, Dome floor air TEMP-CSE= 7.2 / temperature: deg C, pri cast TEMP-SEC= 6.6 / temperature: deg C, sec air TEMP-PRI= 7.1 / temperature: deg C, pri air TEMP-CON= 25.9 / temperature: deg C, CE200 box TEMP-HRK= 10.5 / temperature: deg C, heated Rack TEMP-CS1= 9.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC68792.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'CCC/MG/Tn' / Name(s) or ID(s) DATE-OBS= '13/10/99' / Universal Date: DD/MM/YY TIME-OBS= '01:26:57' / start Universal time ENDTIME = '01:27:08' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 0600 / Grating description, lines/mm GTILT = 25.31 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2742 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:30UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= 9.7 / temperature: deg C, Dome floor air TEMP-CSE= 7.2 / temperature: deg C, pri cast TEMP-SEC= 6.6 / temperature: deg C, sec air TEMP-PRI= 7.1 / temperature: deg C, pri air TEMP-CON= 27.2 / temperature: deg C, CE200 box TEMP-HRK= 10.6 / temperature: deg C, heated Rack TEMP-CS1= 9.3 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC68793.fts' / File name OBJECT = 'HD192954' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'CCC/MG/Tn' / Name(s) or ID(s) DATE-OBS= '13/10/99' / Universal Date: DD/MM/YY TIME-OBS= '01:34:29' / start Universal time ENDTIME = '01:53:06' / End time of exposure RA = '20:12:36' / Right Ascension, hh:mm:ss DEC = '15:33:00' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 1117 / Exposure time in seconds EXPCOUNT= 2455 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 0600 / Grating description, lines/mm GTILT = 25.31 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2743 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT previous stellar exp may be double exp with previous exp to it.A bug? COMMENT ccdtemp @00:30UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= 9.7 / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 6.2 / temperature: deg C, sec air TEMP-PRI= 7.1 / temperature: deg C, pri air TEMP-CON= 27.3 / temperature: deg C, CE200 box TEMP-HRK= 10.6 / temperature: deg C, heated Rack TEMP-CS1= 9.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC68794.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'CCC/MG/Tn' / Name(s) or ID(s) DATE-OBS= '13/10/99' / Universal Date: DD/MM/YY TIME-OBS= '01:53:55' / start Universal time ENDTIME = '01:54:06' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 4.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 0600 / Grating description, lines/mm GTILT = 25.31 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2743 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:30UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= 9.7 / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 6.2 / temperature: deg C, sec air TEMP-PRI= 7.1 / temperature: deg C, pri air TEMP-CON= 28.6 / temperature: deg C, CE200 box TEMP-HRK= 10.8 / temperature: deg C, heated Rack TEMP-CS1= 9.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC68795.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'CCC/MG/Tn' / Name(s) or ID(s) DATE-OBS= '13/10/99' / Universal Date: DD/MM/YY TIME-OBS= '01:54:29' / start Universal time ENDTIME = '01:54:29' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 0600 / Grating description, lines/mm GTILT = 25.31 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2743 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccdtemp @00:30UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= 9.7 / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 6.2 / temperature: deg C, sec air TEMP-PRI= 7.1 / temperature: deg C, pri air TEMP-CON= 28.7 / temperature: deg C, CE200 box TEMP-HRK= 10.8 / temperature: deg C, heated Rack TEMP-CS1= 9.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[376:575,1:1024]' / Frame format FILE = 'CC68796.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'CCC/MG/Tn' / Name(s) or ID(s) DATE-OBS= '13/10/99' / Universal Date: DD/MM/YY TIME-OBS= '01:57:18' / start Universal time ENDTIME = '01:57:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 8.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 4200 / Central wavelength for observation GRATING = 0600 / Grating description, lines/mm GTILT = 25.31 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2743 / telescope focus FOCUSSP = 5.00 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccdtemp @00:30UT -100.3C COMMENT INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 60 / % relative humidity TEMP-DOM= 9.7 / temperature: deg C, Dome floor air TEMP-CSE= 7.1 / temperature: deg C, pri cast TEMP-SEC= 6.2 / temperature: deg C, sec air TEMP-PRI= 7.1 / temperature: deg C, pri air TEMP-CON= 28.6 / temperature: deg C, CE200 box TEMP-HRK= 10.9 / temperature: deg C, heated Rack TEMP-CS1= 9.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 10.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï