***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68212.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:02:58' / start Universal time ENDTIME = '06:03:10' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 19.4 / temperature: deg C, CE200 box TEMP-HRK= 14.9 / temperature: deg C, heated Rack TEMP-CS1= 15.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68213.fts' / File name OBJECT = 'HD216489' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:04:07' / start Universal time ENDTIME = '06:09:08' / End time of exposure RA = '22:48:07' / Right Ascension, hh:mm:ss DEC = '16:18:38' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 301 / Exposure time in seconds EXPCOUNT= 5911 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 19.4 / temperature: deg C, CE200 box TEMP-HRK= 14.8 / temperature: deg C, heated Rack TEMP-CS1= 15.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68214.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:10:08' / start Universal time ENDTIME = '06:10:20' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 19.3 / temperature: deg C, CE200 box TEMP-HRK= 14.8 / temperature: deg C, heated Rack TEMP-CS1= 15.2 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68215.fts' / File name OBJECT = 'HD216489' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:11:23' / start Universal time ENDTIME = '06:16:24' / End time of exposure RA = '22:48:07' / Right Ascension, hh:mm:ss DEC = '16:18:38' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 301 / Exposure time in seconds EXPCOUNT= 5493 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 19.4 / temperature: deg C, CE200 box TEMP-HRK= 14.9 / temperature: deg C, heated Rack TEMP-CS1= 15.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68216.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:17:19' / start Universal time ENDTIME = '06:17:31' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 19.4 / temperature: deg C, CE200 box TEMP-HRK= 14.7 / temperature: deg C, heated Rack TEMP-CS1= 15.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68217.fts' / File name OBJECT = 'HD216489' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:18:24' / start Universal time ENDTIME = '06:23:25' / End time of exposure RA = '22:48:07' / Right Ascension, hh:mm:ss DEC = '16:18:38' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 301 / Exposure time in seconds EXPCOUNT= 4259 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 19.3 / temperature: deg C, CE200 box TEMP-HRK= 14.5 / temperature: deg C, heated Rack TEMP-CS1= 15.1 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.4 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68218.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:25:17' / start Universal time ENDTIME = '06:25:29' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 19.0 / temperature: deg C, CE200 box TEMP-HRK= 13.8 / temperature: deg C, heated Rack TEMP-CS1= 15.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68219.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:31:08' / start Universal time ENDTIME = '06:31:20' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 18.1 / temperature: deg C, CE200 box TEMP-HRK= 13.7 / temperature: deg C, heated Rack TEMP-CS1= 15.0 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68220.fts' / File name OBJECT = 'HD12929 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:32:29' / start Universal time ENDTIME = '06:32:40' / End time of exposure RA = '2:01:32 ' / Right Ascension, hh:mm:ss DEC = '22:59:23' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 11 / Exposure time in seconds EXPCOUNT= 6566 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 18.2 / temperature: deg C, CE200 box TEMP-HRK= 13.7 / temperature: deg C, heated Rack TEMP-CS1= 14.9 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.3 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68221.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:33:50' / start Universal time ENDTIME = '06:34:03' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 18.0 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68222.fts' / File name OBJECT = 'HD12929 ' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:34:55' / start Universal time ENDTIME = '06:35:06' / End time of exposure RA = '2:01:32 ' / Right Ascension, hh:mm:ss DEC = '22:59:23' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 11 / Exposure time in seconds EXPCOUNT= 8485 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 18.1 / temperature: deg C, CE200 box TEMP-HRK= 13.7 / temperature: deg C, heated Rack TEMP-CS1= 14.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68223.fts' / File name OBJECT = 'feAr ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:35:54' / start Universal time ENDTIME = '06:36:06' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 18.0 / temperature: deg C, CE200 box TEMP-HRK= 13.7 / temperature: deg C, heated Rack TEMP-CS1= 14.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.2 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68224.fts' / File name OBJECT = 'bias ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:36:37' / start Universal time ENDTIME = '06:36:37' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.9 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68225.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:38:50' / start Universal time ENDTIME = '06:39:02' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.9 / temperature: deg C, CE200 box TEMP-HRK= 13.5 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68226.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:39:53' / start Universal time ENDTIME = '06:40:06' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.8 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68227.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:40:15' / start Universal time ENDTIME = '06:40:27' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.7 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68228.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:40:36' / start Universal time ENDTIME = '06:40:48' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.7 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68229.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:40:57' / start Universal time ENDTIME = '06:41:09' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.9 / temperature: deg C, CE200 box TEMP-HRK= 13.5 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68230.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:41:18' / start Universal time ENDTIME = '06:41:30' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.8 / temperature: deg C, CE200 box TEMP-HRK= 13.4 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.1 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68231.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:41:39' / start Universal time ENDTIME = '06:41:51' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.7 / temperature: deg C, CE200 box TEMP-HRK= 13.6 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68232.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:42:00' / start Universal time ENDTIME = '06:42:12' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.7 / temperature: deg C, CE200 box TEMP-HRK= 13.5 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68233.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:42:21' / start Universal time ENDTIME = '06:42:33' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.7 / temperature: deg C, CE200 box TEMP-HRK= 13.5 / temperature: deg C, heated Rack TEMP-CS1= 14.5 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC68234.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= 'Blk/Ri ' / Name(s) or ID(s) DATE-OBS= '19/09/99' / Universal Date: DD/MM/YY TIME-OBS= '06:42:42' / start Universal time ENDTIME = '06:42:54' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 1900 / Equinox EXPTIME = 5.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6563 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 56.25 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2718 / telescope focus FOCUSSP = 4.85 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT ccd temp @ 03:00UT-100.4 COMMENT exp meter now 1000V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = ' ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 72.00 / % relative humidity TEMP-DOM= 11.00 / temperature: deg C, Dome floor air TEMP-CSE= 10.6 / temperature: deg C, pri cast TEMP-SEC= 8.9 / temperature: deg C, sec air TEMP-PRI= 10.7 / temperature: deg C, pri air TEMP-CON= 17.8 / temperature: deg C, CE200 box TEMP-HRK= 13.5 / temperature: deg C, heated Rack TEMP-CS1= 14.4 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 16.0 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï