***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67091.fts' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:00:50' / start Universal time ENDTIME = '06:00:50' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.525 / temperature: deg C, CE200 box TEMP-HRK= 20.712 / temperature: deg C, heated Rack TEMP-CS1= 20.8 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.8 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67092.fts' / File name OBJECT = 'bias(4) ' / Image name IMAGETYP= 'zero ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:01:59' / start Universal time ENDTIME = '06:01:59' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 0 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.481 / temperature: deg C, CE200 box TEMP-HRK= 20.806 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.7 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67093.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:10:57' / start Universal time ENDTIME = '06:11:04' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT OG560 order sep for flats COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.486 / temperature: deg C, CE200 box TEMP-HRK= 20.766 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67094.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:11:13' / start Universal time ENDTIME = '06:11:21' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT OG560 order sep for flats COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.530 / temperature: deg C, CE200 box TEMP-HRK= 20.693 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67095.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:11:30' / start Universal time ENDTIME = '06:11:38' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT OG560 order sep for flats COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.581 / temperature: deg C, CE200 box TEMP-HRK= 20.713 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67096.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:11:46' / start Universal time ENDTIME = '06:11:54' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT OG560 order sep for flats COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.582 / temperature: deg C, CE200 box TEMP-HRK= 20.720 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67097.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:12:03' / start Universal time ENDTIME = '06:12:11' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT OG560 order sep for flats COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.598 / temperature: deg C, CE200 box TEMP-HRK= 20.705 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[401:600,1:1024]' / Frame format FILE = 'CC67098.fts' / File name OBJECT = 'Tungsten' / Image name IMAGETYP= 'flat ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:12:20' / start Universal time ENDTIME = '06:12:27' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 6.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 6000 / Central wavelength for observation GRATING = 150 / Grating description, lines/mm GTILT = 23.19 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.78 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT OG560 order sep for flats COMMENT 01:10 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V OG560 order sep for stellar; R60 for comp INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.586 / temperature: deg C, CE200 box TEMP-HRK= 20.712 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.6 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC67099.fts' / File name OBJECT = 'feNe ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:25:54' / start Universal time ENDTIME = '06:26:04' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 3.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 7710 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 64.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.73 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT average of 4 biases COMMENT 06:20 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.358 / temperature: deg C, CE200 box TEMP-HRK= 20.601 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC67100.fts' / File name OBJECT = 'tyc41942188' / Image name IMAGETYP= 'object ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:28:05' / start Universal time ENDTIME = '06:58:06' / End time of exposure RA = '16:49:45' / Right Ascension, hh:mm:ss DEC = '64:07:17' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 1801 / Exposure time in seconds EXPCOUNT= 3302 / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 7710 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 64.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.73 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT 06:20 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.290 / temperature: deg C, CE200 box TEMP-HRK= 20.593 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï ***Observing Log*** SIMPLE = T / Proper FITS format used BITPIX = 16 / 2 byte-pixel per data point NAXIS = 2 / CCD array NAXIS1 = 50 / Fastest varying axis in array NAXIS2 = 1024 / Next axis CCDSEG = '[371:570,1:1024]' / Frame format FILE = 'CC67101.fts' / File name OBJECT = 'feNe ' / Image name IMAGETYP= 'comp ' / Type of observation OBSERVER= '[HI]/WxL' / Name(s) or ID(s) DATE-OBS= '28/07/99' / Universal Date: DD/MM/YY TIME-OBS= '06:58:52' / start Universal time ENDTIME = '06:59:02' / End time of exposure RA = ' ' / Right Ascension, hh:mm:ss DEC = ' ' / Declination, +/-dd:mm:ss HA = ' ' / Actual position of telescope EQUINOX = 2000 / Equinox EXPTIME = 3.00 / Exposure time in seconds EXPCOUNT= / Exposure meter counts AIRMASS = / Airmass at start of exposure CENTLAM = 7710 / Central wavelength for observation GRATING = 1800 / Grating description, lines/mm GTILT = 64.50 / Grating Tilt, degrees XGRATING= / Cross Grating, lines/mm XGTILT = / Cross Grating Tilt, degrees FOCUSTEL= 2676 / telescope focus FOCUSSP = 4.73 / spectrograph focus SLITWID = 306 / slit width in microns SLITLEN = / slit length in microns COMMENT COMMENT 06:20 UT CCD Temp -100.5 COMMENT Exp meter HV=1320V INSTRUME= 'cass-ccd' / Data acquisition instrument DETECTOR= 'DDOCCD ' / CSF-THX-31156 Thomson 1024x1024 ccd ORIGSEC = '[1:1024,1:1024]' / Original frame format TELESCOP= '1.88M ' / Telescope CREATOR = 'CCD5NT v6.0' / Program that created this FITS file FILTER = 'h ' / Filter ID GAIN = 90 / cgain; =[(Gain_Factor-1)]x30 RELHUMID= 40.9 / % relative humidity TEMP-DOM= 23.8 / temperature: deg C, Dome floor air TEMP-CSE= 18.7 / temperature: deg C, pri cast TEMP-SEC= 17 / temperature: deg C, sec air TEMP-PRI= 18.3 / temperature: deg C, pri air TEMP-CON= 25.179 / temperature: deg C, CE200 box TEMP-HRK= 20.084 / temperature: deg C, heated Rack TEMP-CS1= 20.7 / temperature: deg C, Cass: CCD-Bridge TEMP-CS2= 22.5 / temperature: deg C, Cass, position2 TEMP-EC1= / temperature: deg C, Eche, position1 TEMP-EC2= / temperature: deg C, Eche, position2 TEMP-TUB= / temperature: deg C, telescope tube TEMP-CEL= / temperature: deg C, mirror cell Ï